W DOC AIRBUS | AMM A320F

Removal of the Flight Attendant Panel


TASK 23-73-12-000-007-A
Removal of the Flight Attendant Panel


FIN: 120RH ** ON A/C NOT FOR ALL
1. Reason for the Job
Self Explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
CAP - BLANKING
 B. Referenced Information
REFERENCE
DESIGNATION
TASK 23-32-36-000-001-A
Removal of the Integrated Prerecorded Announcement and Boarding Music (PRAM) Flashcard
TASK 23-73-00-861-001-A
Energize the Cabin Intercommunication Data System (CIDS)
TASK 23-73-19-000-002-A
Removal of the Cabin Assignment Module
TASK 23-73-21-000-001-A
Removal of the On-Board Replaceable Module
TASK 24-41-00-861-002-A
Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01
Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02
Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 31-32-00-860-003-A
Procedure to Get Access to the SYSTEM REPORT/TEST/COM Page
3. Job Set-up
Subtask 23-73-12-861-063-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
   (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 23-73-12-970-055-A ** ON A/C NOT FOR ALL
B. Trouble shooting
   (1) Make sure that the Cabin Intercommunication Data System (CIDS) is energized
(Ref. AMM TASK 23-73-00-861-001).
   (2) If available, print the Trouble Shooting Data (TSD) as follows:
  • get access to the SYSTEM REPORT/TEST COM page
    (Ref. AMM TASK 31-32-00-860-003).
  • on this page, push the line select key adjacent to the CIDS1 (2) indication.
  • on the CIDS1 (2) page, push the line select key adjacent to the TROUBLE SHOOT DATA indication to get the CIDS 1 (2) TROUBLE SHOOTING DATA page.
  • print the Trouble Shooting Data page.
Subtask 23-73-12-865-070-A ** ON A/C NOT FOR ALL
C. Open, safety and tag these circuit breakers in this sequence:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
121VUCOM/CIDS/DIR 2/BAT146RHP14
121VUCOM/CIDS/DIR 1/BAT147RHP13
** ON A/C NOT FOR ALL
49VUCOM NAV/CIDS/DIR1 ESS150RHG01
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DIR ESS/1150RHG01
** ON A/C NOT FOR ALL
49VUCOM NAV/CIDS/DIR2 ESS157RHG02
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DIR ESS/2157RHG02
** ON A/C NOT FOR ALL
49VUCOM DIR ESS/2157RHG02
** ON A/C NOT FOR ALL
49VUAIR COND/CIDS/SDF/DIR1 ESS15WHC05
49VUAIR COND/CIDS/SDF/DIR2 ESS18WHC06
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DIR1 NORM151RHM05
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DIR NORM/1151RHM06
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DIR NORM/1151RHM05
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DIR2 NORM156RHM06
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DIR NORM/2156RHM07
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DIR NORM/2156RHM06
** ON A/C NOT FOR ALL
122VUAIR COND/CIDS/SDF/DIR NORM/214WHT18
122VUAIR COND/CIDS/SDF/DIR NORM/117WHT17
** ON A/C NOT FOR ALL
121VUCOM/CIDS/FLT ATTND PANL/BAT149RHQ13
** ON A/C NOT FOR ALL
121VUCOM/CIDS/FWD ATTND PNL/BAT149RHQ13
** ON A/C NOT FOR ALL
49VUCOM/CIDS/FLT ATTND PNL/ESS171RHH01
** ON A/C NOT FOR ALL
49VUCOM/CIDS/FLT ATTND PNL/ESS171RHG03
** ON A/C NOT FOR ALL
121VUCOM CIDS FWD ATTND PNL170RHQ14
** ON A/C NOT FOR ALL
121VUCOM/FAP1/NORM170RHQ14
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/FWD ATTND/PNL170RHQ14
4. Procedure
Subtask 23-73-12-020-058-A ** ON A/C NOT FOR ALL
A. Removal of the Flight Attendant Panel (FAP)
   (1) Release the quick-release fastener (1) and open the cover (2).
   (2) Remove the Cabin Assignment Module (CAM) 115RH.
(Ref. AMM TASK 23-73-19-000-002)
   (3) Remove the On-Board Replaceable Module (OBRM) 116RH.
(Ref. AMM TASK 23-73-21-000-001)
   (4) If an Integrated PRAM Flashcard (IPRAM) 117RH is installed, remove it (Ref. AMM TASK 23-32-36-000-001).
   (5) Disconnect the electrical connectors (4).
   (6) Remove the screws (6) and the washers (5) and carefully remove the FAP (3) from the holder (7).
   (7) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
[Rev.10 from 2021] 2026.04.01 04:42:29 UTC