W DOC AIRBUS | AMM A320F

Procedure to Get Access to the SYSTEM REPORT/TEST/COM Page

TASK 31-32-00-860-003-A
Procedure to Get Access to the SYSTEM REPORT/TEST/COM Page

WARNING: MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. UNWANTED ELECTRICAL POWER CAN BE DANGEROUS.
NOTE: IGNORE ALL THE ECAM WARNINGS AS LONG AS THE COMPUTER IS IN THE MENU MODE.
ZONE: 210
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
210
CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
 B. Referenced Information
REFERENCE
DESIGNATION
TASK 24-41-00-861-002-A
Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01
Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02
Energize the Aircraft Electrical Circuits from Engine 1(2)
F CFDS - SYSTEM REPORT/TEST/COM Page ** ON A/C NOT FOR ALL
F CFDS - SYSTEM REPORT/TEST/COM Page ** ON A/C NOT FOR ALL
3. Job Set-up
Subtask 31-32-00-860-061-A
A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 31-32-00-865-065-A
B. Make sure that this(these) circuit breaker(s) is(are) closed:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
49VUAUTO FLT/MCDU/111CA1B01
** ON A/C NOT FOR ALL
49VUAUTO FLT/MCDU/111CA1H07
** ON A/C NOT FOR ALL
121VUCFDS/CFDIU/SPLY2TWJ18
121VUCFDS/CFDIU/BACK/UP8TWJ17
** ON A/C ALL
121VUAUTO FLT/MCDU/211CA2N20
** ON A/C NOT FOR ALL
121VUCFDS/CFDIU/SPLY2TWJ41
121VUCFDS/CFDIU/BACK/UP8TWJ40
4. Procedure
Subtask 31-32-00-860-062-A ** ON A/C NOT FOR ALL
A. This procedure permits to get access to the systems below:

  • AMU
  • RMP 1
  • RMP 2
  • RMP 3 *
  • CIDS 1
  • CIDS 2
  • HF 1 *
  • HF 2 *
  • VHF 1
  • VHF 2
  • VHF 3 *
  • ACARS MU *
  • SDU *

(* optional system)
NOTE: Some systems are optional. If they are not installed, they are not shown on the menu page.
Subtask 31-32-00-860-062-E ** ON A/C NOT FOR ALL
A. This procedure permits to get access to the systems below:

  • AMU
  • RMP 1
  • RMP 2
  • RMP 3 *
  • CIDS 1
  • CIDS 2
  • HF 1 *
  • HF 2 *
  • VHF 1
  • VHF 2
  • VHF 3 *
  • ACARS MU *
  • SDU *
  • CVR *

(* optional system)
NOTE: Some systems are optional. If they are not installed, they are not shown on the menu page.
Subtask 31-32-00-860-063-A
B. Access to the SYSTEM REPORT/TEST/COM page

F CFDS - SYSTEM REPORT/TEST/COM Page ** ON A/C NOT FOR ALL
F CFDS - SYSTEM REPORT/TEST/COM Page ** ON A/C NOT FOR ALL

NOTE: The procedure below is applicable to the MCDU 1 or 2.
The actions and the results of this procedure occur on the MCDU used.
ACTION
RESULT
Adjust the brightness of the MCDU screen.

  • push the MCDU MENU mode key
On the MCDU:
  • the MCDU MENU page comes into view.
  • push the line key adjacent to the CFDS indication.
the CFDS MENU page comes into view.
  • push the line key adjacent to the SYSTEM REPORT/TEST indication.
the SYSTEM REPORT/TEST page comes into view.
  • push the line key adjacent to the COM indication.
The SYSTEM REPORT/TEST/COM page comes into view.

[Rev.10 from 2021] 2026.04.01 00:33:35 UTC
"Aviabrain" 2025