Engine Oil Filter Change and Magnetic Chip Detector Operation Check [PW11]

TASK 79-35-00-040-803-A
Engine Oil Filter Change and Magnetic Chip Detector Operation Check

ZONE: 400

1. Reason for the Job
MMEL 79-09-02D
ENG 1(2) OIL FILTER CLOG ALERT
MMEL 79-09-04C
ENG 1(2) OIL FILTER DEGRAD ALERT
MMEL 79-09-05C
ENG 1(2) OIL SENSOR FAULT ALERT
MMEL 79-09-07C
ENG 1(2) OIL FILTER - PARTLY CLOGGED ALERT
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
400	POWER PLANT, NACELLES AND PYLONS

B. Referenced Information

REFERENCE	DESIGNATION
TASK 79-21-06-960-801-A	Replace the Oil Filter Element
TASK 79-22-01-720-801-A	Functional Test of the Magnetic Chip Collectors

3. Job Set-up
Subtask 79-35-00-860-051-A ** ON A/C NOT FOR ALL

A. Non Applicable

4. Procedure
Subtask 79-35-00-960-051-A ** ON A/C NOT FOR ALL

A. Do the replacement of the Oil Filter Element (Ref. AMM TASK 79-21-06-960-801)

Subtask 79-35-00-720-051-A ** ON A/C NOT FOR ALL

B. Do the functional test of the Magnetic Chip Collectors (Ref. AMM TASK 79-22-01-720-801)

5. Close-up
Subtask 79-35-00-860-055-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make an entry in the logbook to record that the Oil Filter element has been changed and the Magnetic Chip Detector checked

[Rev.10 from 2021] 2026.04.01 03:42:31 UTC