Deactivation of the Thrust Reverser System When Cascade Missing [PW11]

TASK 78-32-00-040-805-A
Deactivation of the Thrust Reverser System When Cascade Missing

1. Reason for the Job
CDL 78-17
Thrust Reverser Upper Cascade
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 78-30-00-040-806-A	Deactivation of the Thrust Reverser for Flight
TASK 78-32-30-000-801-A	Removal of the Left Thrust-Reverser Cascades - ENG NO. 1
TASK 78-32-30-000-802-A	Removal of the Left Thrust-Reverser Cascades - ENG NO. 2
TASK 78-32-60-000-801-A	Removal of the Right Thrust-Reverser Cascades - ENG NO. 1
TASK 78-32-60-000-802-A	Removal of the Right Thrust-Reverser Cascades - ENG NO. 2

3. Job Set-up
Subtask 78-32-00-860-063-A ** ON A/C NOT FOR ALL

A. NOT APPLICABLE

4. Procedure
Subtask 78-32-00-040-094-A ** ON A/C NOT FOR ALL

A. Do as follows:
(1) Remove the applicable Thrust Reverser Thrust Reverser Upper Cascade (Ref. AMM TASK 78-32-30-000-801) (Ref. AMM TASK 78-32-30-000-802) (Ref. AMM TASK 78-32-60-000-801) (Ref. AMM TASK 78-32-60-000-802)
(2) Do the deactivation of the Trust Reverser System for Flight (Ref. AMM TASK 78-30-00-040-806)

5. Close-up
Subtask 78-32-00-860-066-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make an entry in the logbook to record that the Thrust Reverser System has been deactivated

[Rev.10 from 2021] 2026.04.01 03:31:55 UTC