Deactivation of the Thrust Reverser With Inhibition Cable Missing [PW11]

TASK 78-31-00-040-803-A
Deactivation of the Thrust Reverser With Inhibition Cable Missing

1. Reason for the Job
CDL 78-35
Hydraulic Control Unit Inhibition Handle
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 78-30-00-040-806-A	Deactivation of the Thrust Reverser for Flight
TASK 78-31-06-000-801-A	Removal of the Lower Inhibit Lever Cable
TASK 78-31-06-000-802-A	Removal of the Upper Inhibit Lever Cable

3. Job Set-up
Subtask 78-31-00-860-083-A ** ON A/C NOT FOR ALL

A. Not Applicable

4. Procedure
Subtask 78-31-00-000-052-A ** ON A/C NOT FOR ALL

A. Make sure that the Lower inhibition lever cable is removed (Ref. AMM TASK 78-31-06-000-801)

NOTE: Make sure the applicable Hydraulic Control Unit Inhibition Handle is removed.

Subtask 78-31-00-000-051-A ** ON A/C NOT FOR ALL

B. Remove the Upper inhibition lever cable (Ref. AMM TASK 78-31-06-000-802)

Subtask 78-31-00-040-061-A ** ON A/C NOT FOR ALL

C. Deactivation of the Thrust Reverser System for Flight (Ref. AMM TASK 78-30-00-040-806)

NOTE: Maintenance deactivation procedure is not needed to be applied because inhibition lever cable has been already removed

5. Close-up
Subtask 78-31-00-860-085-A ** ON A/C NOT FOR ALL

A. Make an applicable entry in the log book"

[Rev.10 from 2021] 2026.04.01 03:30:54 UTC