Detailed Inspection of All Cockpit Windows from Inside

TASK 56-10-00-200-003-A
Detailed Inspection of All Cockpit Windows from Inside

ZONE: 210

1. Reason for the Job
Refer to the MPD TASK: 561000-01
DETAILED INSPECTION OF ALL COCKPIT WINDOWS FROM INSIDE.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

C. Referenced Information

REFERENCE	DESIGNATION
TASK 56-11-11-200-001-A	Inspection of the Windshields
TASK 56-11-12-200-001-A	Inspection of the Fixed Windows
TASK 56-12-11-200-001-A	Inspection of the Sliding Windows

3. Job Set-up
Subtask 56-10-00-865-056-A

WARNING: MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE OPENED, SAFETIED AND TAGGED.

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	COM NAV/RADAR/1	5SQ1	K13
** ON A/C NOT FOR ALL
121VU	COM NAV/RADAR/2	5SQ2	K14
** ON A/C ALL
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
122VU	ANTI ICE/WHC/2	5DG2	W13
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/WHC/1	5DG1	X13
123VU	ANTI ICE/L/WHSLD	1DG1	AF10
123VU	ANTI ICE/R/WHSLD	1DG2	AF03

4. Procedure
Subtask 56-10-00-220-054-A

A. Inspection of the Cockpit Windows
(1) Do a detailed inspection from inside of:
(a) The windshields (Ref. AMM TASK 56-11-11-200-001),
(b) The fixed windows (Ref. AMM TASK 56-11-12-200-001),
(c) The sliding windows (Ref. AMM TASK 56-12-11-200-001).

5. Close-up
Subtask 56-10-00-865-057-A

A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	COM NAV/RADAR/1	5SQ1	K13
** ON A/C NOT FOR ALL
121VU	COM NAV/RADAR/2	5SQ2	K14
** ON A/C ALL
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
122VU	ANTI ICE/WHC/2	5DG2	W13
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/WHC/1	5DG1	X13
123VU	ANTI ICE/L/WHSLD	1DG1	AF10
123VU	ANTI ICE/R/WHSLD	1DG2	AF03

Subtask 56-10-00-410-051-A

B. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 02:06:47 UTC