Removal of the Integrally-Lighted Identification Plate

TASK 33-13-41-000-001-A
Removal of the Integrally-Lighted Identification Plate

ZONE: 210
ZONE: 211
ZONE: 212
FIN: 18LF
FIN: 19LF
FIN: 20LF
FIN: 21LF
FIN: 22LF
FIN: 23LF
FIN: 24LF
FIN: 25LF
FIN: 26LF
FIN: 35LF
FIN: 36LF
FIN: 51LF

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
211	COCKPIT
212	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 27-41-41-000-001-A	Removal of the Control Mechanism-Pitch Trim
TASK 27-51-43-000-002-A	Removal of the Lighted Plate
TASK 76-11-41-000-040-A	Removal of the Throttle Control Lever Assembly
TASK 76-11-41-000-041-A	Removal of the Throttle Control Lever Assembly
TASK 76-11-41-000-042-A	Removal of the Throttle Control Lever Assembly
TASK 76-11-41-000-802-A	Removal of the Throttle Control Lever Assembly
ESPM 2045210
AIPC 76-12-08-
Integrally-Lighted Identification Plate

3. Job Set-up
Subtask 33-13-41-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/INSTL LT/MAIN INST/PNL AND/PED	4LF	Y04

4. Procedure
Subtask 33-13-41-020-050-A

A. Removal of the Integrally-Lighted Identification Plate (19LF and 20LF)
(1) Remove the wheels (33) and the indicators (34) (Ref. AMM TASK 27-41-41-000-001).
(2) Remove the screws (35) and (37).
(3) Remove the integrally-lighted identification plates (36) and (38).

Subtask 33-13-41-020-054-B ** ON A/C NOT FOR ALL

B. Removal of the Integrally-Lighted Identification Plate (21LF)
(1) Remove the integrally-lighted identification plate of the throttle control-lever assembly (Ref. AMM TASK 76-11-41-000-040).

Subtask 33-13-41-020-054-C ** ON A/C NOT FOR ALL

B. Removal of the Integrally-Lighted Identification Plate (21LF)
(1) Remove the integrally-lighted identification plate of the throttle control-lever assembly (Ref. AMM TASK 76-11-41-000-041).

Subtask 33-13-41-020-054-D ** ON A/C NOT FOR ALL

B. Removal of the Integrally-Lighted Identification Plate (21LF)
(1) Remove the integrally-lighted identification plate of the throttle control-lever assembly (Ref. AMM TASK 76-11-41-000-042).

Subtask 33-13-41-020-054-F ** ON A/C NOT FOR ALL

B. Removal of the Integrally-Lighted Identification Plate (21LF)
(1) Remove the integrally-lighted identification plate of the throttle control-lever assembly (Ref. AMM TASK 76-11-41-000-802).

Subtask 33-13-41-020-055-A

C. Removal of the Integrally-Lighted Identification Plate (18LF)
(1) Loosen the four quarter-turn fasteners (3).
(2) Pull SWITCHING panel 8VU (4).
(3) Remove the four screws (1).
(4) Remove the integrally-lighted identification plate (2).

Subtask 33-13-41-020-056-A

D. Removal of the Integrally-Lighted Identification Plates (23LF and 24LF)
(1) Loosen the two quarter-turn fasteners (31) and (7).
(2) Pull FLOOD LT panel 112VU (32) and FLOOD LT/INTEG LT panel 111VU (8).
(3) Remove the two screws (29) and (5).
(4) Remove the integrally-lighted identification plates (30) and (6).

Subtask 33-13-41-020-057-A

E. Removal of the Integrally-Lighted Identification Plate (26LF)
(1) Disassemble the knobs, the nuts and the washers of the ENG/MASTER 1 and 2 control switches (3KC and 2KC) AIPC 76-12-08- ESPM 2045210.
(2) Loosen the four quarter-turn fasteners (27).
(3) Pull ENG panel 115VU (28).
(4) Remove the three screws (25).
(5) Remove the integrally-lighted identification plate (26).

Subtask 33-13-41-020-058-A

F. Removal of the Integrally-Lighted Identification Plate (22LF)
(1) Loosen the four quarter-turn fasteners (12).
(2) Pull RUD TRIM/PARKING BRK panel 110VU (11).
(3) Remove the four screws (9).
(4) Remove the integrally-lighted identification plate (10).

Subtask 33-13-41-020-059-A

G. Removal of the Integrally-Lighted Identification Plates (35LF and 36LF)
(1) Remove the four screws (15).
(2) Pull the GEAR panel (16).
(3) Remove the four screws (13).
(4) Remove the integrally-lighted identification plates (14).

Subtask 33-13-41-020-060-A

H. Removal of the Integrally-Lighted Identification Plates (25LF)
(1) Remove the integrally-lighted identification plate (Ref. AMM TASK 27-51-43-000-002).

Subtask 33-13-41-020-061-A

I. Removal of the Integrally-Lighted Identification Plates (50LF), if Installed
(1) Loosen the two quarter-turn fasteners (19).
(2) Pull VIP COM panel 113VU (20).
(3) Remove the three screws (17).
(4) Remove the integrally-lighted identification plate (18).

Subtask 33-13-41-020-062-A

J. Removal of the Integrally-Lighted Identification Plates (51LF), if Installed
(1) Loosen the two quarter-turn fasteners (23).
(2) Pull COCKPIT DOOR panel 119VU (24).
(3) Remove the three screws (21).
(4) Remove the integrally-lighted identification plate (22).

[Rev.10 from 2021] 2026.04.01 00:52:49 UTC