Procedure to Get Access to the SYSTEM REPORT/TEST/ELEC Page

TASK 31-32-00-860-004-A
Procedure to Get Access to the SYSTEM REPORT/TEST/ELEC Page

WARNING: MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. UNWANTED ELECTRICAL POWER CAN BE DANGEROUS.

NOTE: IGNORE ALL THE ECAM WARNINGS AS LONG AS THE COMPUTER IS IN THE MENU MODE.

ZONE: 210

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
CFDS - SYSTEM REPORT/TEST/ELEC Page

3. Job Set-up
Subtask 31-32-00-860-064-A

A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)

Subtask 31-32-00-865-066-A

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	AUTO FLT/MCDU/1	11CA1	B01
** ON A/C NOT FOR ALL
49VU	AUTO FLT/MCDU/1	11CA1	H07
** ON A/C NOT FOR ALL
121VU	CFDS/CFDIU/SPLY	2TW	J18
121VU	CFDS/CFDIU/BACK/UP	8TW	J17
** ON A/C ALL
121VU	AUTO FLT/MCDU/2	11CA2	N20
** ON A/C NOT FOR ALL
121VU	CFDS/CFDIU/SPLY	2TW	J41
121VU	CFDS/CFDIU/BACK/UP	8TW	J40

4. Procedure
Subtask 31-32-00-860-065-C

A. This procedure permits to get access to the systems below:

AC GEN
GCU EMER
BCL 1
BCL 2
TR 1
TR 2
TR 3

NOTE: When you get the TR3 menu, the test OK indication comes into view. You must ignore this indication.

Subtask 31-32-00-860-066-A

B. Access to the SYSTEM REPORT/TEST/ELEC page

CFDS - SYSTEM REPORT/TEST/ELEC Page

NOTE: The procedure below is applicable to the MCDU 1 or 2.
The actions and the results of this procedure occur on the MCDU used.

ACTION	RESULT
Adjust the brightness of the MCDU screen.
push the MCDU MENU mode key	On the MCDU: the MCDU MENU page comes into view.
push the line key adjacent to the CFDS indication.	the CFDS MENU page comes into view.
push the line key adjacent to the SYSTEM REPORT/TEST indication.	the SYSTEM REPORT/TEST page comes into view.
push the line key adjacent to the ELEC indication.	the SYSTEM REPORT/TEST/ELEC page comes into view.

[Rev.10 from 2021] 2026.04.01 00:33:36 UTC