Removal of the Control Panel
TASK 31-17-11-000-801-A
Removal of the Control Panel
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 31-17-11-860-050-A
Subtask 31-17-11-020-050-A
[Rev.10 from 2021]
2026.04.01 06:29:10 UTC
Removal of the Control Panel
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| No specific | 1 | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 150 | AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT |
| 826 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-003-A | Open the FWD or Aft Cargo-Compartment Door with the Hand Pump |
Subtask 31-17-11-860-050-A
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 31-17-11-865-050-A (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
B. Open, safety and tag this(these) circuit breaker(s):
Subtask 31-17-11-010-050-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 2000VU | LIGHT-CARGO COMPT-AFT | 2LU | J07 |
C. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below aft cargo-compartment door 826.
(2) Open aft cargo-compartment door 826 (Ref. AMM TASK 52-30-00-860-001) or (Ref. AMM TASK 52-30-00-860-003).
4. Procedure(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below aft cargo-compartment door 826.
(2) Open aft cargo-compartment door 826 (Ref. AMM TASK 52-30-00-860-001) or (Ref. AMM TASK 52-30-00-860-003).
Subtask 31-17-11-020-050-A
A. Removal of Control Panel 2024VU
(1) Hold the control panel (4) and remove the screws (5) and the washers (6).
(2) Carefully pull the control panel (4) out from the structure (2) until you have access to the electrical connector (1).
(3) Disconnect the electrical connector (1).
(4) Put a CAP - BLANKING on the disconnected electrical connector (1).
(5) Remove and discard the gasket (3).
(6) Remove the control panel (4).
(1) Hold the control panel (4) and remove the screws (5) and the washers (6).
(2) Carefully pull the control panel (4) out from the structure (2) until you have access to the electrical connector (1).
(3) Disconnect the electrical connector (1).
(4) Put a CAP - BLANKING on the disconnected electrical connector (1).
(5) Remove and discard the gasket (3).
(6) Remove the control panel (4).
Control Panel 2024VU