W DOC AIRBUS | AMM A320F

Removal of the Control Panel


TASK 31-17-11-000-801-A
Removal of the Control Panel


ZONE: 150
FIN: 2024VU
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific
1
CAP - BLANKING
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
150
AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT
826
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 24-41-00-861-002-A
Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01
Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02
Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 52-30-00-860-001-A
Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-003-A
Open the FWD or Aft Cargo-Compartment Door with the Hand Pump
3. Job Set-up
Subtask 31-17-11-860-050-A
A. Aircraft Maintenance Configuration
   (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 31-17-11-865-050-A
B. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
2000VULIGHT-CARGO COMPT-AFT2LUJ07
Subtask 31-17-11-010-050-A
C. Get Access
   (1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below aft cargo-compartment door 826.
   (2) Open aft cargo-compartment door 826 (Ref. AMM TASK 52-30-00-860-001) or (Ref. AMM TASK 52-30-00-860-003).
4. Procedure
Subtask 31-17-11-020-050-A
A. Removal of Control Panel 2024VU
   (1) Hold the control panel (4) and remove the screws (5) and the washers (6).
   (2) Carefully pull the control panel (4) out from the structure (2) until you have access to the electrical connector (1).
   (3) Disconnect the electrical connector (1).
   (4) Put a CAP - BLANKING on the disconnected electrical connector (1).
   (5) Remove and discard the gasket (3).
   (6) Remove the control panel (4).
[Rev.10 from 2021] 2026.04.01 00:33:16 UTC