Remove Door Escape Slide/Raft for Inflation Reservoir in Shop Hydrostatic Test

TASK 25-62-00-750-001-A
Remove Door Escape Slide/Raft for Inflation Reservoir in Shop Hydrostatic Test

ZONE: 831
ZONE: 832
ZONE: 841
ZONE: 842

1. Reason for the Job
Refer to the MPD TASK: 256241-02
REMOVE DOOR ESCAPE SLIDE/RAFT FOR INFLATION RESERVOIR IN SHOP HYDROSTATIC TEST.

NOTE: This task is not applicable for deactivated passenger/crew door.

2. Job Set-up Information
A. Work Zones and Access Panels

B. Referenced Information

REFERENCE	DESIGNATION
TASK 25-62-44-000-002-A	Removal of the Left Escape-Slide Pack-Assembly
TASK 25-62-44-000-012-A	Removal of the Left-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-000-802-A	Removal of the Right Escape-Slide Pack-Assembly
TASK 25-62-44-000-804-A	Removal of the Right-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-400-006-A	Installation of the Left Escape-Slide Pack-Assembly
TASK 25-62-44-400-007-A	Installation of the Left-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-400-802-A	Installation of the Right Escape-Slide Pack-Assembly
TASK 25-62-44-400-803-A	Installation of the Right-Hand Escape-Slide-Raft Pack-Assembly

3. Job Set-up
Subtask 25-62-00-020-052-A

A. Get Access
(1) Remove the escape-slide pack-assembly (Ref. AMM TASK 25-62-44-000-002) and (Ref. AMM TASK 25-62-44-000-802) or the escape-slide raft pack-assembly (Ref. AMM TASK 25-62-44-000-012) and (Ref. AMM TASK 25-62-44-000-804).

4. Procedure
Subtask 25-62-00-750-050-A

A. Workshop Procedure
(1) Send the inflation reservoir to the workshop for a hydrostatic test.

5. Close-up
Subtask 25-62-00-420-052-A

A. Close Access
(1) Install a serviceable escape-slide pack-assembly (Ref. AMM TASK 25-62-44-400-006) and (Ref. AMM TASK 25-62-44-400-802) or a serviceable escape-slide raft pack-assembly (Ref. AMM TASK 25-62-44-400-007) and (Ref. AMM TASK 25-62-44-400-803).

[Rev.10 from 2021] 2026.03.31 23:40:13 UTC