Reactivation of the Protection Panel(s) for the Decompression Panel(s) at the Forward Partition

TASK 25-54-00-440-801-A
Reactivation of the Protection Panel(s) for the Decompression Panel(s) at the Forward Partition

ZONE: 130

1. Reason for the Job
MMEL 25-50-07A
PROTECTION PANELS OF DECOMPRESSION PANELS AT THE FWD PARTITION WALL OF FWD CARGO COMPARTMENT (IF INSTALLED)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER
No specific	1	WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
130	FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 25-54-11-400-001-A	Installation of the Forward Cargo-Compartment Partition FR24A
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-002-A	Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Clear Area if the Protection Panel is damaged

3. Job Set-up
Subtask 25-54-00-860-052-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(3) Put a ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the opening of the forward cargo-compartment door.
(4) Set the light switch to on.
(5) Put a WARNING NOTICE(S) in position on the control panel of the forward cargo-compartment loading-system to tell persons not to use it.

Subtask 25-54-00-865-052-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	SEMI AUTO CLS-FWD	3MY	E08
2000VU	SEMI AUTO CLS-FWD	2MY	E06

4. Procedure
Subtask 25-54-00-440-050-A

A. Reactivation of the Protection Panels

Clear Area if the Protection Panel is damaged

(1) Install the protection panels (Ref. AMM TASK 25-54-11-400-001).

5. Close-up
Subtask 25-54-00-865-053-A

A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	SEMI AUTO CLS-FWD	3MY	E08
2000VU	SEMI AUTO CLS-FWD	2MY	E06

Subtask 25-54-00-860-053-A

B. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the WARNING NOTICE(S).
(3) Set the light switch to off.
(4) Remove the access platform(s).
(5) Close the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-002).
(6) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:38:51 UTC