Removal of the Special Equipment of the Space Flex Lavatory
TASK 25-45-40-000-804-A
Removal of the Special Equipment of the Space Flex Lavatory
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 25-45-40-861-054-A ** ON A/C NOT FOR ALL Subtask 25-45-40-010-051-A ** ON A/C NOT FOR ALL
Subtask 25-45-40-020-054-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:36:49 UTC
Removal of the Special Equipment of the Space Flex Lavatory
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-45-18-000-802-A | Removal of the Access Doors of the Space Flex Lavatory |
Subtask 25-45-40-861-054-A ** ON A/C NOT FOR ALL Subtask 25-45-40-010-051-A ** ON A/C NOT FOR ALL
B. Get Access to the Space-Flex Lavatory-Amenities Dispenser
(1) Remove the access door (Ref. AMM TASK 25-45-18-000-802).
4. Procedure(1) Remove the access door (Ref. AMM TASK 25-45-18-000-802).
Subtask 25-45-40-020-054-A ** ON A/C NOT FOR ALL
A. Removal of the Amenities Dispenser of the Space Flex Lavatory
(1) Open the access door (1).
(2) Remove the screws (7) and the washers (6).
(3) Lift the paper towel dispenser (8) and remove it.
(4) Open the access door (2).
(5) Remove the screws (4), the washers (5) and the flap (3).
Subtask 25-45-40-020-055-A ** ON A/C NOT FOR ALL (1) Open the access door (1).
(2) Remove the screws (7) and the washers (6).
(3) Lift the paper towel dispenser (8) and remove it.
(4) Open the access door (2).
(5) Remove the screws (4), the washers (5) and the flap (3).
B. Removal of the Air-Sick Bag Dispenser of the Space Flex Lavatory
(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screws (4) and the cover (5).
(3) Remove the screws (3) and the washers (2) and pull the shroud (1) out.
(4) Remove the pin (6) and the air-sick bag dispenser (7).
(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screws (4) and the cover (5).
(3) Remove the screws (3) and the washers (2) and pull the shroud (1) out.
(4) Remove the pin (6) and the air-sick bag dispenser (7).
Amenities Dispenser of the Space Flex Lavatory