DOC AIRBUS | AMM A320FRemoval of the Washbasin
TASK 25-45-38-000-001-A
Removal of the Washbasin
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-45-38-861-050-A
Subtask 25-45-38-020-050-A
[Rev.10 from 2021]
2026.04.01 06:21:57 UTC
Removal of the Washbasin
ZONE: 200
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | PLUG - BLANKING |
| No specific | AR | SCRAPER - NON METALLIC |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-45-13-000-001-A | Removal of the Lavatory Mirror |
| TASK 25-45-14-000-001-A | Removal of the Soap Dispenser |
| TASK 25-45-25-000-001-A | Removal of the Baby Nursing Table |
| TASK 38-12-41-000-001-A | Removal of the Water Faucet |
Wash BasinSubtask 25-45-38-861-050-A
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
Subtask 25-45-38-010-050-A (1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
B. Get Access
(1) Remove the lavatory mirror (Ref. AMM TASK 25-45-13-000-001).
(2) Remove the water faucet (Ref. AMM TASK 38-12-41-000-001).
(3) If fitted, remove the baby nursing table (Ref. AMM TASK 25-45-25-000-001).
(4) Remove the soap dispenser (Ref. AMM TASK 25-45-14-000-001).
4. Procedure(1) Remove the lavatory mirror (Ref. AMM TASK 25-45-13-000-001).
(2) Remove the water faucet (Ref. AMM TASK 38-12-41-000-001).
(3) If fitted, remove the baby nursing table (Ref. AMM TASK 25-45-25-000-001).
(4) Remove the soap dispenser (Ref. AMM TASK 25-45-14-000-001).
Subtask 25-45-38-020-050-A
A. Removal of the Wash Basin
(1) Open the access door (1) and push the clips (3) to release the toilet roll holder (4) from the lining (2).
(2) Remove the waste box from under the waste chute (6).
(3) Remove the spring clips (9), the spacers (7), the pin (8) and disconnect the damper (4).
(4) Remove the screws (5) and the waste chute (6).
(5) Remove the clamp (13), the clamp (10) and disconnect the hoses (12) and (11).
(6) Put the PLUG-BLANKING in each disconnected line end.
(7) Remove the screws (3).
(8) Remove the screw (14).
(9) Remove the screws (15).
(10) Remove the screws (16).
(11) Use the SCRAPER - NON METALLIC to remove the sealant from the wash basin (2).
(12) Remove the wash basin (2).
(1) Open the access door (1) and push the clips (3) to release the toilet roll holder (4) from the lining (2).
(2) Remove the waste box from under the waste chute (6).
(3) Remove the spring clips (9), the spacers (7), the pin (8) and disconnect the damper (4).
(4) Remove the screws (5) and the waste chute (6).
(5) Remove the clamp (13), the clamp (10) and disconnect the hoses (12) and (11).
(6) Put the PLUG-BLANKING in each disconnected line end.
(7) Remove the screws (3).
(8) Remove the screw (14).
(9) Remove the screws (15).
(10) Remove the screws (16).
(11) Use the SCRAPER - NON METALLIC to remove the sealant from the wash basin (2).
(12) Remove the wash basin (2).