DOC AIRBUS | AMM A320FRemoval of the Service Cabinet Door
TASK 25-45-12-000-001-A
Removal of the Service Cabinet Door
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 25-45-12-861-050-A
Subtask 25-45-12-020-050-B
[Rev.10 from 2021]
2026.03.31 23:35:40 UTC
Removal of the Service Cabinet Door
ZONE: 200
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
Service Cabinet DoorSubtask 25-45-12-861-050-A
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Make sure that the aircraft electrical circuits are de-energized (Ref. AMM TASK 24-41-00-862-002).
4. Procedure(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Make sure that the aircraft electrical circuits are de-energized (Ref. AMM TASK 24-41-00-862-002).
Subtask 25-45-12-020-050-B
A. Removal of the Service Cabinet Door
(1) Open the service cabinet door (1) and remove the dispenser (2).
(2) Remove the screws (3), the washers (4) and the nuts (5) from the upper and lower door stops (6).
(3) Remove the screws (7), the washers (8), the hinge (9) and the service cabinet door (1).
Subtask 25-45-12-020-052-A ** ON A/C NOT FOR ALL (1) Open the service cabinet door (1) and remove the dispenser (2).
(2) Remove the screws (3), the washers (4) and the nuts (5) from the upper and lower door stops (6).
(3) Remove the screws (7), the washers (8), the hinge (9) and the service cabinet door (1).
B. Removal of the Service Cabinet Door of the Space Flex Lavatory
(1) Remove the service cabinet door (1) as follows:
(a) Push the button (2) and open the service cabinet door (1).
(b) Remove the screw (7) and the washer (6).
(c) If the washers (5) and the spacer (3) are installed, remove them.
(d) Release the door stop (4).
(e) Remove the pins (8) and the service cabinet door (1).
(2) Remove the service cabinet door (10) as follows:
(a) Push the button (11) and open the service cabinet door (10).
(b) Remove the pins (9) and the service cabinet door (10).
(1) Remove the service cabinet door (1) as follows:
(a) Push the button (2) and open the service cabinet door (1).
(b) Remove the screw (7) and the washer (6).
(c) If the washers (5) and the spacer (3) are installed, remove them.
(d) Release the door stop (4).
(e) Remove the pins (8) and the service cabinet door (1).
(2) Remove the service cabinet door (10) as follows:
(a) Push the button (11) and open the service cabinet door (10).
(b) Remove the pins (9) and the service cabinet door (10).