Reactivation of the Galley-Waste-Compartment Access Door (If Installed)

TASK 25-35-00-440-802-A
Reactivation of the Galley-Waste-Compartment Access Door (If Installed)

1. Reason for the Job
MMEL 25-35-02A
GALLEY WASTE COMPARTMENT ACCESS DOOR (IF INSTALLED)
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05RAB9)	Adhesive Film Tape-- Aluminium Foil -

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 25-35-00-440-001-A	Reactivation of the Galley-Waste-Compartment Flapper-Door

3. Job Set-up
Subtask 25-35-00-860-093-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network (Ref. AMM TASK 24-42-00-861-001).

Subtask 25-35-00-010-097-A

B. Get Access
(1) In the galley with the defective access door:

Get access to the galley-waste-compartment.

4. Procedure
Subtask 25-35-00-440-051-A

A. Reactivation
(1) Remove the Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) .
(2) If necessary, repair or replace the galley-waste-compartment access door as specified in the related galley component maintenance-manual.
(3) Make sure that the access door:

Operates correctly
Is aligned with the surface
Closes and seals fully.

(4) Remove the warning notice(s).
(5) Reactivate the galley-waste compartment flapper door (Ref. AMM TASK 25-35-00-440-001).
(6) Make an entry in the logbook.

5. Close-up
Subtask 25-35-00-860-094-A

A. Aircraft Maintenance Configuration
(1) Make sure that the work area is clean and clear of tools and other items.
(2) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:34:13 UTC