Deactivation of the Galley-Waste-Compartment Access Door (If Installed)

TASK 25-35-00-040-802-A
Deactivation of the Galley-Waste-Compartment Access Door (If Installed)

1. Reason for the Job
MMEL 25-35-02A
GALLEY WASTE COMPARTMENT ACCESS DOOR (IF INSTALLED)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	WARNING NOTICE(S)

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05RAB9)	Adhesive Film Tape-- Aluminium Foil -

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 25-35-00-040-001-A	Deactivation of the Galley-Waste-Compartment Flapper-Door

3. Job Set-up
Subtask 25-35-00-860-092-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network (Ref. AMM TASK 24-42-00-861-001).

Subtask 25-35-00-010-096-A

B. Get Access
(1) In the galley with the defective access door:

Get access to the galley-waste-compartment.

4. Procedure
Subtask 25-35-00-040-051-A

A. Deactivation
(1) Make sure that the waste container is empty.
(2) Deactivate the galley-waste-compartment flapper door (Ref. AMM TASK 25-35-00-040-001).
(3) Close the access door and attach it to the galley with Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) to make sure that it cannot open.
(4) Put the WARNING NOTICE(S) in position to tell persons not to use the galley-waste-compartment.
(5) Make an entry in the logbook.

5. Close-up
Subtask 25-35-00-862-083-A

A. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:34:13 UTC