DOC AIRBUS | AMM A320FRemoval of the Moisture Barrier Foil (MYLAR)
TASK 25-28-43-000-001-A
Removal of the Moisture Barrier Foil (MYLAR)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 25-28-43-861-050-A Subtask 25-28-43-010-050-A
Subtask 25-28-43-020-050-A
(2) Use the SCRAPER - NON METALLIC and remove the Moisture Barrier Foil (MYLAR) (1) from the floor panels (2).
[Rev.10 from 2021]
2026.03.31 23:33:20 UTC
Removal of the Moisture Barrier Foil (MYLAR)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | CUTTER - THIN BLADE |
| No specific | 1 | SCRAPER - NON METALLIC |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-28-41-000-001-A | Removal of the Textile Floor Covering |
| TASK 25-28-42-000-001-A | Removal of the Non-Textile Floor Covering (NTF) |
Installation of the Moisture Barrier Foil (MYLAR)Subtask 25-28-43-861-050-A Subtask 25-28-43-010-050-A
B. Get Access
(1) Make sure that the Textile Floor Covering (Ref. AMM TASK 25-28-41-000-001) and/or the Non-Textile Floor Covering (Ref. AMM TASK 25-28-42-000-001) is removed.
(2) Make sure that the area of the Moisture Barrier Foil (MYLAR) is free from equipment and furnishings.
4. Procedure(1) Make sure that the Textile Floor Covering (Ref. AMM TASK 25-28-41-000-001) and/or the Non-Textile Floor Covering (Ref. AMM TASK 25-28-42-000-001) is removed.
(2) Make sure that the area of the Moisture Barrier Foil (MYLAR) is free from equipment and furnishings.
Subtask 25-28-43-020-050-A
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
A. Removal of the Moisture Barrier Foil (MYLAR) CAUTION:
REMOVE THE FLOOR COVERING CAREFULLY TO PREVENT DAMAGE TO THE CABIN FLOOR PANELS.
(1) Use the CUTTER - THIN BLADE and cut the Moisture Barrier Foil (MYLAR) (1) that is around the contour of the floor panels (2). (2) Use the SCRAPER - NON METALLIC and remove the Moisture Barrier Foil (MYLAR) (1) from the floor panels (2).
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
(3) Clean the component interface and/or the adjacent area with Non Aqueous Cleaner-General - - (Material No.08BAA9) .