DOC AIRBUS | AMM A320FRemoval of the Non-Textile Floor Covering (NTF)
TASK 25-28-42-000-001-A
Removal of the Non-Textile Floor Covering (NTF)
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 25-28-42-861-051-A Subtask 25-28-42-010-050-A
Subtask 25-28-42-020-050-A
[Rev.10 from 2021]
2026.03.31 23:33:15 UTC
Removal of the Non-Textile Floor Covering (NTF)
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SCRAPER - NON METALLIC |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 33-51-00-00 | CABIN EMERGENCY LIGHTING - DESCRIPTION AND OPERATION |
Non-Textile Floor-CoveringSubtask 25-28-42-861-051-A Subtask 25-28-42-010-050-A
B. Get Access
(1) Remove the emergency-escape path marking as necessary. Refer to (Ref. AMM D/O 33-51-00-00) to know which emergency lights are installed.
(2) Refer to chapter 25 to know which equipment/furnishings you must remove to get access to the work area. Then remove these items.
4. Procedure(1) Remove the emergency-escape path marking as necessary. Refer to (Ref. AMM D/O 33-51-00-00) to know which emergency lights are installed.
(2) Refer to chapter 25 to know which equipment/furnishings you must remove to get access to the work area. Then remove these items.
Subtask 25-28-42-020-050-A
A. Removal of the NTF from the Floor Panels
(1) Remove the screws (1) and the joint-strips (2).
(2) Remove the sealant (4) around the door sills (6) with a SCRAPER - NON METALLIC.
(3) Remove the screws (5) and the door sills (6).
(4) Remove the sealant (4) around the NTF (3) with a SCRAPER - NON METALLIC.
(6) Remove the NTF (3) with a SCRAPER - NON METALLIC and Non Aqueous Cleaner-General - - (Material No.08BAA9) and discard the NTF (3).
(1) Remove the screws (1) and the joint-strips (2).
(2) Remove the sealant (4) around the door sills (6) with a SCRAPER - NON METALLIC.
(3) Remove the screws (5) and the door sills (6).
(4) Remove the sealant (4) around the NTF (3) with a SCRAPER - NON METALLIC.
CAUTION:
REMOVE THE FLOOR COVERING CAREFULLY TO PREVENT DAMAGE TO THE CABIN FLOOR PANELS.
CAUTION:
DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE MADE OF CARBONFIBER REINFORCED PLASTIC.
(5) Carefully lift a corner of the NTF (3) and pull it from the floor panels. (6) Remove the NTF (3) with a SCRAPER - NON METALLIC and Non Aqueous Cleaner-General - - (Material No.08BAA9) and discard the NTF (3).