Installation of the Actuator on the Foot Rest Assembly

TASK 25-13-14-400-003-A
Installation of the Actuator on the Foot Rest Assembly

ZONE: 211
ZONE: 212

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

B. Expendable Parts

FIG.ITEM	DESIGNATION	IPC-CSN
4	COTTER PIN	AIPC 25-13-14-02-310
9	COTTER PIN	AIPC 25-13-14-02-310

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 25-13-14-400-001-A	Installation of the Foot Rest and Sliding Table Assembly
Actuator on the Foot Rest and Sliding Table Assembly

3. Job Set-up
Subtask 25-13-14-861-052-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001)

4. Procedure
Subtask 25-13-14-420-052-B

A. Installation of the Actuator on the Foot Rest Assembly
(1) Install the foot rest assembly (10) on a bench, with the foot rest on the top and in the stowed position.
(2) Engage the actuator (5) (on actuator body side) in the clevis, engage the hinge pin (6).
(3) Install the washer (7), the nut (8) and tighten it.
(4) Install a new AIPC 25-13-14-02-310 COTTER PIN (9).
(5) Compress the actuator (5) (3 mm approximately) and engage the actuator rod in its hinge pin (1).
(6) Install the washer (2), the nut (3) and tighten it.
(7) Install a new AIPC 25-13-14-02-310 COTTER PIN (4).

5. Close-up
Subtask 25-13-14-942-052-A

A. Removal of Equipement
(1) Make sure that the work area is clean and clear of tools and other items

Subtask 25-13-14-861-053-A

B. Aircraft Maintenance Configuration
(Ref. AMM TASK 24-42-00-862-001)

[Rev.10 from 2021] 2026.03.31 23:28:54 UTC