Installation of the Foot Rest and Sliding Table Assembly

TASK 25-13-14-400-001-A
Installation of the Foot Rest and Sliding Table Assembly

ZONE: 211
ZONE: 212

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

B. Referenced Information

REFERENCE	DESIGNATION
Foot Rest and Sliding Table Assembly.

3. Job Set-up
Subtask 25-13-14-860-062-A

A. Not Applicable

4. Procedure
Subtask 25-13-14-420-050-A

A. Installation of the Foot Rest and Sliding Table Assembly
(1) Install the foot rest and sliding table assembly (1) on the framework (7).
(2) Install the washers (3) and the screws (2).
(3) Install the slot flap (6) and the screws (5).
(4) Install the screws (4) and tighten them.
(5) Tighten the screws (5) and (3).
(6) Install the thermoformed cover on the left (right) instrument panel.

5. Close-up
Subtask 25-13-14-942-050-A

A. Removal of Equipment
(1) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 23:28:49 UTC