DOC AIRBUS | AMM A320FGeneral Visual Inspection of G, E and P Routes Installed in the Forward Cargo Compartment (EWIS)
TASK 24-92-00-210-805-A
General Visual Inspection of G, E and P Routes Installed in the Forward Cargo Compartment (EWIS)
1. Reason for the Job
Refer to the MPD TASK: 200131-02
GENERAL VISUAL INSPECTION OF G, E AND P ROUTES INSTALLED IN THE FORWARD CARGO COMPARTMENT (EWIS)
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 24-92-00-010-143-A ** ON A/C NOT FOR ALL
Subtask 24-92-00-210-105-A
Subtask 24-92-00-410-141-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:26:41 UTC
General Visual Inspection of G, E and P Routes Installed in the Forward Cargo Compartment (EWIS)
1. Reason for the Job
Refer to the MPD TASK: 200131-02
GENERAL VISUAL INSPECTION OF G, E AND P ROUTES INSTALLED IN THE FORWARD CARGO COMPARTMENT (EWIS)
NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| No specific | AR | FLASHLIGHT |
| No specific | AR | MIRROR - INSPECTION, FLEXIBLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 131 | FORWARD CARGO COMPARTMENT |
| 132 | FORWARD CARGO COMPARTMENT |
| 825 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 25-54-12-000-002-A | Removal of the Ceiling Panels in the Forward Cargo Compartment |
| TASK 25-54-12-000-003-A | Removal of the Sidewall Panels in the Forward Cargo Compartment |
| TASK 25-54-12-400-002-A | Installation of the Ceiling Panels in the Forward Cargo Compartment |
| TASK 25-54-12-400-003-A | Installation of the Sidewall Panels in the Forward Cargo Compartment |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-002-A | Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-003-A | Open the FWD or Aft Cargo-Compartment Door with the Hand Pump |
| TASK 52-30-00-860-004-A | Close the FWD or Aft Cargo-Compartment Door with the Hand Pump |
| ESPM 2052110 | |
Forward Cargo Compartment - Inspection Area - Zones 131-132Subtask 24-92-00-010-143-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position.
(2) Open the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-001) and (Ref. AMM TASK 52-30-00-860-003).
(3) Remove the ceiling panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-000-002).
(4) Remove the sidewall panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-000-003).
Subtask 24-92-00-010-143-B ** ON A/C NOT FOR ALL (1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position.
(2) Open the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-001) and (Ref. AMM TASK 52-30-00-860-003).
(3) Remove the ceiling panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-000-002).
(4) Remove the sidewall panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-000-003).
A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position.
(2) Open the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-001) and (Ref. AMM TASK 52-30-00-860-003).
(3) Remove the ceiling panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-000-002).
(4) Remove the sidewall panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-000-003).
Subtask 24-92-00-862-131-A (1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position.
(2) Open the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-001) and (Ref. AMM TASK 52-30-00-860-003).
(3) Remove the ceiling panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-000-002).
(4) Remove the sidewall panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-000-003).
B. Make sure that the aircraft electrical circuits are de-energized
(Ref. AMM TASK 24-41-00-862-002).
4. Procedure(Ref. AMM TASK 24-41-00-862-002).
Subtask 24-92-00-210-105-A
A. General Visual Inspection of G, E and P Routes Installed in the Forward Cargo Compartment
(1) Do a visual inspection of the wiring to make sure that there is no signs of ageing, alteration, overheating, scaling and deformation ESPM 2052110:
(a) On the AC/DC feeder routes: 1G and 2G.
(b) On the AC/DC power-distribution routes: 1P and 2P.
(c) On the generator excitation routes: 1E and 2E.
5. Close-up(1) Do a visual inspection of the wiring to make sure that there is no signs of ageing, alteration, overheating, scaling and deformation ESPM 2052110:
(a) On the AC/DC feeder routes: 1G and 2G.
(b) On the AC/DC power-distribution routes: 1P and 2P.
(c) On the generator excitation routes: 1E and 2E.
NOTE: Use a FLASHLIGHT or a MIRROR - INSPECTION, FLEXIBLE if necessary.
(2) Make sure that there is no dust, lint or hydraulic contamination. Subtask 24-92-00-410-141-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the sidewall panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-400-003).
(3) Install the ceiling panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-400-002).
(4) Close the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-002) and (Ref. AMM TASK 52-30-00-860-004).
(5) Remove the access platform(s).
Subtask 24-92-00-410-141-B ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the sidewall panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-400-003).
(3) Install the ceiling panels in the FWD cargo compartment from FR24 to FR34 (Ref. AMM TASK 25-54-12-400-002).
(4) Close the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-002) and (Ref. AMM TASK 52-30-00-860-004).
(5) Remove the access platform(s).
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the sidewall panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-400-003).
(3) Install the ceiling panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-400-002).
(4) Close the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-002) and (Ref. AMM TASK 52-30-00-860-004).
(5) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the sidewall panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-400-003).
(3) Install the ceiling panels in the FWD cargo compartment from FR24 to FR35.7 (Ref. AMM TASK 25-54-12-400-002).
(4) Close the FWD cargo-compartment door 825 (Ref. AMM TASK 52-30-00-860-002) and (Ref. AMM TASK 52-30-00-860-004).
(5) Remove the access platform(s).