GENERAL VISUAL INSPECTION OF FWD AND AFT PASSENGER/CREW DOORS (EWIS)

TASK 05-28-30-200-005-A
GENERAL VISUAL INSPECTION OF FWD AND AFT PASSENGER/CREW DOORS (EWIS)

ZONE: 831
ZONE: 832
ZONE: 841
ZONE: 842

1. Reason for the Job
Refer to the MPD TASK: ZL-831-02
GENERAL VISUAL INSPECTION OF FWD AND AFT PASSENGER/CREW DOORS (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
831	FORWARD PASSENGER/CREW DOOR
832	AFT PASSENGER/CREW DOOR
841	FORWARD PASSENGER/CREW DOOR
842	AFT PASSENGER/CREW DOOR
831AZ, 831BZ, 831CZ, 831DZ, 831EZ, 831FZ, 831GZ, 832AZ, 832BZ, 832CZ, 832DZ, 832EZ, 832FZ, 832GZ, 841AZ, 841BZ, 841CZ, 841DZ, 841EZ, 841FZ, 841GZ, 842AZ, 842BZ, 842CZ, 842DZ, 842EZ, 842FZ, 842GZ

B. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-46-000-001-A	Removal of the Door Linings from the Forward Passenger/Crew Doors
TASK 25-23-46-000-002-A	Removal of the Door Linings from the Aft Passenger/Crew Doors
TASK 25-23-46-400-001-A	Installation of the Door Linings on the Forward Passenger/Crew Doors
TASK 25-23-46-400-002-A	Installation of the Door Linings on the Aft Passenger/Crew Doors

3. Job Set-up
Subtask 05-28-30-010-052-A

A. Get Access
(1) Remove the linings.
(a) For the FWD passenger/crew doors:
831AZ 831BZ, 831CZ,
831DZ 831EZ 831FZ,
831GZ,
841AZ 841BZ, 841CZ,
841DZ 841EZ 841FZ,
841GZ
(Ref. AMM TASK 25-23-46-000-001).
(b) For the aft passenger/crew doors:
832AZ 832BZ, 832CZ,
832DZ 832EZ 832FZ,
832GZ,
842AZ 842BZ, 842CZ,
842DZ 842EZ 842FZ,
842GZ
(Ref. AMM TASK 25-23-46-000-002).
(2) Lift the insulation.

4. Procedure
Subtask 05-28-30-210-054-A

A. Inspection
(1) Do a general visual inspection of the FWD and aft passenger/crew doors.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, piping) are attached correctly.

NOTE: Lift the insulation blankets sufficiently to complete a correct general visual inspection as necessary.

5. Close-up
Subtask 05-28-30-410-052-A

A. Close Access
(1) Put the insulation back in position.
(2) Install the linings.
(a) For the FWD passenger/crew doors:
831AZ 831BZ, 831CZ,
831DZ 831EZ 831FZ,
831GZ,
841AZ 841BZ, 841CZ,
841DZ 841EZ 841FZ,
841GZ
(Ref. AMM TASK 25-23-46-400-001).
(b) For the aft passenger/crew doors:
832AZ 832BZ, 832CZ,
832DZ 832EZ 832FZ,
832GZ,
842AZ 842BZ, 842CZ,
842DZ 842EZ 842FZ,
842GZ
(Ref. AMM TASK 25-23-46-400-002).

[Rev.10 from 2021] 2026.03.31 22:50:59 UTC