GENERAL VISUAL INSPECTION OF REAR AVIONICS COMPARTMENT (EWIS)
TASK 05-21-20-200-005-A
GENERAL VISUAL INSPECTION OF REAR AVIONICS COMPARTMENT (EWIS)
1. Reason for the Job
Refer to the MPD TASK: ZL-127-01
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 05-21-20-010-054-A
Subtask 05-21-20-210-054-A
Subtask 05-21-20-410-054-A
[Rev.8 from Aug 2017]
2026.03.31 22:48:37 UTC
GENERAL VISUAL INSPECTION OF REAR AVIONICS COMPARTMENT (EWIS)
1. Reason for the Job
NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 127 | REAR AVIONIC COMPARTMENT |
| 128 | REAR AVIONIC COMPARTMENT |
| 824 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 52-41-00-010-002-A | Open the Avionics Compartment Doors for Access |
| TASK 52-41-00-410-002-A | Close the Avionics Compartment Doors after Access |
Subtask 05-21-20-010-054-A
A. Get Access
(1) Put an ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone 127.
(2) Open the access door 824 (Ref. AMM TASK 52-41-00-010-002).
4. Procedure(1) Put an ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone 127.
(2) Open the access door 824 (Ref. AMM TASK 52-41-00-010-002).
Subtask 05-21-20-210-054-A
A. Inspection
(1) Do a general visual inspection of the aft avionic compartment (Zones 127 and 128).
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, ducting, piping) are attached correctly.
5. Close-up(1) Do a general visual inspection of the aft avionic compartment (Zones 127 and 128).
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, ducting, piping) are attached correctly.
Subtask 05-21-20-410-054-A
A. Close Access
(1) Close the access door 824 (Ref. AMM TASK 52-41-00-410-002).
(2) Remove the access platform(s).
(1) Close the access door 824 (Ref. AMM TASK 52-41-00-410-002).
(2) Remove the access platform(s).