Removal of the DOS Actuator to Operate the Aircraft with this Component Missing and/or the DOS Actuactor Fitting Missing [PW11]

TASK 78-36-00-040-809-A
Removal of the DOS Actuator to Operate the Aircraft with this Component Missing and/or the DOS Actuactor Fitting Missing

1. Reason for the Job
CDL 78-01
Thrust Reverser Opening Actuator
CDL 78-14
Duct Opening Actuator Fitting
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 78-36-00-010-807-A	Opening of the Thrust Reverser Doors - Sling Method
TASK 78-36-00-410-807-A	Closing of the Thrust Reverser Doors - Sling Method
TASK 78-36-02-000-801-A	Removal of the Thrust Reverser Door Opening System (DOS) Actuator

3. Job Set-up
Subtask 78-36-00-010-121-A ** ON A/C NOT FOR ALL

A. Open the Thrust Reverser With Sling Method (Ref. AMM TASK 78-36-00-010-807)

4. Procedure
Subtask 78-36-00-000-051-A ** ON A/C NOT FOR ALL

A. Remove the applicable DOS Assy (Ref. AMM TASK 78-36-02-000-801)

5. Close-up
Subtask 78-36-00-410-108-A ** ON A/C NOT FOR ALL

A. Close the Trust Reverser With Sling Method (Ref. AMM TASK 78-36-00-410-807)

Subtask 78-36-00-860-061-A ** ON A/C NOT FOR ALL

B. Aircraft Maintenance Configuration
(1) Make an entry in the logbook to record that the DOS Actuator has been removed

[Rev.10 from 2021] 2026.04.01 03:34:02 UTC