Deactivation of the Thrust Reverser System When Translating Sleeve Stop Are Missing [PW11]

TASK 78-32-00-040-807-A
Deactivation of the Thrust Reverser System When Translating Sleeve Stop Are Missing

1. Reason for the Job
CDL 78-25
Thrust Reverser Translating Sleeve Stopper Pin
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 78-30-00-040-806-A	Deactivation of the Thrust Reverser for Flight
TASK 78-32-39-000-801-A	Removal of the Translating Sleeve Stopper Pin

3. Job Set-up
Subtask 78-32-00-860-067-A ** ON A/C NOT FOR ALL

A. Not applicable

4. Procedure
Subtask 78-32-00-000-054-A ** ON A/C NOT FOR ALL

A. Remove the applicable Thrust Reverser Translating Sleeve Stopper Pin (Ref. AMM TASK 78-32-39-000-801).

Subtask 78-32-00-040-095-A ** ON A/C NOT FOR ALL

B. Do the deactivation of the Trust Reverser System for Flight (Ref. AMM TASK 78-30-00-040-806)

5. Close-up
Subtask 78-32-00-860-068-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make an entry in the logbook to record that the Thrust Reverser System has been deactivated

[Rev.10 from 2021] 2026.04.01 03:31:58 UTC