DOC AIRBUS | AMM A320FWindshield Weather Seal-Repair
TASK 56-11-11-300-001-A
Windshield Weather Seal-Repair
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 56-11-11-941-053-A
Subtask 56-11-11-020-051-A 4. Procedure
Subtask 56-11-11-914-052-A
Subtask 56-11-11-420-052-A Subtask 56-11-11-865-058-A
[Rev.10 from 2021]
2026.04.01 12:51:25 UTC
Windshield Weather Seal-Repair
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
CAUTION:
BEFORE YOU INSTALL/REMOVE THE GSE-TOOL, READ THE INSTRUCTIONS IN THE APPLICABLE GSE INSTRUCTION MANUAL. WHILE YOU OPERATE THIS TOOL, CAREFULLY OBEY THEM. IF YOU DO NOT OBEY THE INSTRUCTIONS, DAMAGE TO EQUIPMENT CAN OCCUR.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 1 | SCRAPER - PLASTIC |
| No specific | 1 | TAPE - ADHESIVE |
| 98D56103003000 | 1 | SPATULA-WEATHER SEAL |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.06AFB1) | Polysulfide Sealant-Windshield Fillet - |
| (Material No.06PAG1) | Adhesion Promoter-For Polysulfide Sealant - - |
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 30-45-52-000-002-A | Removal of the Wiper Arm |
| TASK 30-45-52-400-002-A | Installation of the Wiper Arm |
| TASK 56-10-00-110-001-A | Cleaning of the L/R Windshields |
Windshield Weather SealSubtask 56-11-11-941-053-A
A. Get Access
(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at zone 210 in front of the windshield.
Subtask 56-11-11-865-057-A (1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at zone 210 in front of the windshield.
WARNING:
MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE OPENED, SAFETIED AND TAGGED.
B. Open, safety and tag this(these) circuit breaker(s):| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 121VU | COM NAV/RADAR/1 | 5SQ1 | K13 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/2 | 5SQ2 | K14 |
| ** ON A/C ALL | |||
| 122VU | ANTI ICE/WINDOWS/R | 4DG2 | W14 |
| 122VU | ANTI ICE/WHC/2 | 5DG2 | W13 |
| 122VU | ANTI ICE/WINDOWS/L | 4DG1 | X14 |
| 122VU | ANTI ICE/WHC/1 | 5DG1 | X13 |
| 123VU | ANTI ICE/L/WHSLD | 1DG1 | AF10 |
| 123VU | ANTI ICE/R/WHSLD | 1DG2 | AF03 |
Subtask 56-11-11-914-052-A
A. Repair of the Windshield Weather Seal
(1) Examine the seal for erosion, cracks and bond to the glass surface.
(2) Use the SCRAPER - PLASTIC to remove the sealant with cracks or loose or damaged sealant.
(3) Clean the windshield weather seal with Non Aqueous Cleaner-General - - (Material No.08BAA9) and the Textile-Lint free Cotton - (Material No.14SBA1) .
(4) Apply TAPE - ADHESIVE around the edges of the glass pane.
(5) Apply Adhesion Promoter-For Polysulfide Sealant - - (Material No.06PAG1) on the windshield weather seal before you apply Polysulfide Sealant-Windshield Fillet - (Material No.06AFB1) .
(b) For the PPG windshield, but not for PPG windshield with a stainless steel Z section (P/Ns NP-165311-1 to NP-165311-4 change B), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003204).
(c) For the SGS windshield with a stainless steel Z section (P/Ns STA320-1-7 to STA320-2-8), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003202).
(d) For the PPG windshield with a stainless steel Z section (P/Ns NP-165311-5/6/7/8 and NP-165331-1/2), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003206).
(e) For the PPG windshield with a stainless steel Z section (P/Ns NP-165311-3/4 change C), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003206).
(f) For the GKN windshield with a stainless steel Z section (P/Ns 06282 and 06283), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003208).
(g) For the GKN windshield with a stainless steel Z section (P/Ns 25022 and 25023), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003208).
(7) Remove the TAPE - ADHESIVE.
(8) Clean the windshield (Ref. AMM TASK 56-10-00-110-001).
5. Close-up(1) Examine the seal for erosion, cracks and bond to the glass surface.
(2) Use the SCRAPER - PLASTIC to remove the sealant with cracks or loose or damaged sealant.
(3) Clean the windshield weather seal with Non Aqueous Cleaner-General - - (Material No.08BAA9) and the Textile-Lint free Cotton - (Material No.14SBA1) .
(4) Apply TAPE - ADHESIVE around the edges of the glass pane.
(5) Apply Adhesion Promoter-For Polysulfide Sealant - - (Material No.06PAG1) on the windshield weather seal before you apply Polysulfide Sealant-Windshield Fillet - (Material No.06AFB1) .
NOTE: The sealant cure time and the mixing ratio are given in the sealant-kit manufacturer instructions.
(6) Apply Polysulfide Sealant-Windshield Fillet - (Material No.06AFB1) on the windshield weather seal to get the dimensions given in the figure: NOTE: The sealant cure time and the mixing ratio are given in the sealant-kit manufacturer instructions.
(a) For the SGS windshield, but not for the SGS windshield with a stainless steel Z section (P/Ns STA320-1-3 to STA320-2-6), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003200). (b) For the PPG windshield, but not for PPG windshield with a stainless steel Z section (P/Ns NP-165311-1 to NP-165311-4 change B), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003204).
(c) For the SGS windshield with a stainless steel Z section (P/Ns STA320-1-7 to STA320-2-8), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003202).
(d) For the PPG windshield with a stainless steel Z section (P/Ns NP-165311-5/6/7/8 and NP-165331-1/2), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003206).
(e) For the PPG windshield with a stainless steel Z section (P/Ns NP-165311-3/4 change C), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003206).
(f) For the GKN windshield with a stainless steel Z section (P/Ns 06282 and 06283), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003208).
(g) For the GKN windshield with a stainless steel Z section (P/Ns 25022 and 25023), use the 98D56103003000 SPATULA-WEATHER SEAL (98D56103003208).
(7) Remove the TAPE - ADHESIVE.
(8) Clean the windshield (Ref. AMM TASK 56-10-00-110-001).
Subtask 56-11-11-420-052-A Subtask 56-11-11-865-058-A
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 56-11-11-942-055-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 121VU | COM NAV/RADAR/1 | 5SQ1 | K13 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/2 | 5SQ2 | K14 |
| ** ON A/C ALL | |||
| 122VU | ANTI ICE/WINDOWS/R | 4DG2 | W14 |
| 122VU | ANTI ICE/WHC/2 | 5DG2 | W13 |
| 122VU | ANTI ICE/WINDOWS/L | 4DG1 | X14 |
| 122VU | ANTI ICE/WHC/1 | 5DG1 | X13 |
| 123VU | ANTI ICE/L/WHSLD | 1DG1 | AF10 |
| 123VU | ANTI ICE/R/WHSLD | 1DG2 | AF03 |
C. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).