General Visual Inspection of Aft Cargo Compartment Door Skin, External Surface

TASK 52-32-11-200-011-A
General Visual Inspection of Aft Cargo Compartment Door Skin, External Surface

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 826

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
826	AFT CARGO COMPARTMENT DOOR
826AR

D. Referenced Information

REFERENCE	DESIGNATION
TASK 52-32-14-000-801-A	Removal of the Aft Cargo-Compartment-Door Access-Panels
TASK 52-32-14-400-801-A	Installation of the Aft Cargo-Compartment-Door Access-Panels
SRM 511100
SRM 512200
SRM 512300
External Surface of the Aft Cargo-Compartment-Door

3. Job Set-up
Subtask 52-32-11-941-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at closed aft cargo-compartment door 826.

Subtask 52-32-11-110-051-A ** ON A/C NOT FOR ALL

B. Preparation of the Inspection Area
(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If necessary, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .

4. Procedure
Subtask 52-32-11-210-063-B ** ON A/C NOT FOR ALL

A. Inspection
(1) Do a general visual inspection of the external surface of the aft cargo-compartment door-skin for damage or discontinuities.
(2) Make sure that there is no:
(a) Corrosion:
If you find corrosion, refer to the Structural Repair Manual SRM 512200 for the corrosion types, inspection, removal and subsequent corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find this type of damage, refer to the Structural Repair Manual SRM 511100 for the damage types, classification and corrective action.
(c) Paint layer damage:
If you find this type of damage, refer to the Structural Repair Manual SRM 512300 for general data for paint layers.
(3) Examine the indication windows of access panel 826AR for cracks and scratches.
(a) If there are cracks, replace the panel of the indication windows (Ref. AMM TASK 52-32-14-000-801) and (Ref. AMM TASK 52-32-14-400-801).
(b) If there are scratches on the window panel of the indication windows, replace it at not more than 100FC after this inspection.

5. Close-up
Subtask 52-32-11-942-051-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 01:42:14 UTC