Installation of the Aft Cargo-Compartment-Door Access-Panels

TASK 52-32-14-400-801-A
Installation of the Aft Cargo-Compartment-Door Access-Panels

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 826

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)
No specific	Torque wrench: range to between 3 and 2.7 m.N (26.55 and 23.89 lbf.in )

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.06AAA1)	Polysulfide Sealant_General Purpose Brushable -
(Material No.06AAB1)	Polysulfide Sealant-General Purpose Fillet -
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
826	AFT CARGO COMPARTMENT DOOR

D. Expendable Parts

FIG.ITEM	DESIGNATION	IPC-CSN
5	SIGHT GLASS	AIPC 52-32-11-08-050

E. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-002-A	Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Aft Cargo-Compartment Door Access-Panels ** ON A/C NOT FOR ALL
Aft Cargo-Compartment-Door Access-Panel ** ON A/C NOT FOR ALL
Aft Cargo-Compartment Door Access-Panels ** ON A/C NOT FOR ALL
Aft Cargo-Compartment-Door Access-Panel ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 52-32-14-010-050-A

A. Get Access
(1) Make sure that the aft cargo-compartment door is correctly closed and locked (Ref. AMM TASK 52-30-00-860-002).
(2) Make sure that the ACCESS PLATFORM 2M (6 FT) is in position at the aft cargo-compartment door.

Subtask 52-32-14-100-050-A

B. Cleaning
(1) Use a Textile-Lint free Cotton - (Material No.14SBA1) made moist with Non Aqueous Cleaner-General - - (Material No.08BAA9) to clean:

All the fasteners
The mating surfaces of the access panel(s) and the cargo door.

4. Procedure
Subtask 52-32-14-420-050-B ** ON A/C NOT FOR ALL

A. Installation of the Aft Cargo-Compartment Door Access-Panels
(1) Put the access panel (2) in position, then the access panel (1) on the aft cargo-compartment door.
(2) TORQUE the studs (3) to between 3 and 2.7 m.N (26.55 and 23.89 lbf.in )

Subtask 52-32-14-420-050-D ** ON A/C NOT FOR ALL

A. Installation of the Aft Cargo-Compartment-Door Access-Panel
(1) For each sight glass (5) that you removed, install a new one as follows:
(a) Apply Polysulfide Sealant_General Purpose Brushable - (Material No.06AAA1) on the mating surface of the sheet (4) and the new AIPC 52-32-11-08-050 SIGHT GLASS (5).
(b) Apply Polysulfide Sealant_General Purpose Brushable - (Material No.06AAA1) on the shafts of the screws (6) and on the nuts (3).
(c) Put the sight glass (5) in position on the access panel (1).
(d) Install the sheet (4), the screws (6) and the nuts (3).
(e) Tighten the nuts (3).
(f) Apply Polysulfide Sealant-General Purpose Fillet - (Material No.06AAB1) in the space between the sheet (4), the sight glass (5) and the access panel (1).
(g) Let the sealant dry.
(2) Put the access panel (1) in position on the aft cargo-compartment door.
(3) For the studs (2) with Part Number (P/N) NSA55137 or NSA55131:
(a) Turn the studs (2) a quarter turn clockwise.
(4) For the studs (2) P/N ABS0691:
(a) TORQUE the studs (2) to between 3 and 2.7 m.N (26.55 and 23.89 lbf.in )

5. Close-up
Subtask 52-32-14-410-050-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Make sure that the aft cargo-compartment is correctly closed and locked (Ref. AMM TASK 52-30-00-860-002).
(3) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 04:40:58 UTC