Remove Main Landing Gear Retraction Actuator and Pins for Special Detailed Inspection in Shop

TASK 32-31-00-220-002-A
Remove Main Landing Gear Retraction Actuator and Pins for Special Detailed Inspection in Shop

ZONE: 731
ZONE: 741

1. Reason for the Job
Refer to the MPD TASK: 323100-09
REMOVE MAIN LANDING GEAR RETRACTION ACTUATOR AND PINS FOR SPECIAL DETAILED INSPECTION IN SHOP
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
731	L.H MAIN GEAR
741	R.H MAIN GEAR

B. Referenced Information

REFERENCE	DESIGNATION
TASK 32-31-46-000-001-A	Removal of the MLG Actuating Cylinder
TASK 32-31-46-400-001-A	Installation of the MLG Actuating Cylinder

3. Job Set-up
Subtask 32-31-00-020-053-A

A. Removal of the Equipment
(1) Remove the applicable MLG Actuating Cylinder (Ref. AMM TASK 32-31-46-000-001).

4. Procedure
Subtask 32-31-00-220-052-A

A. Remove Main Landing Gear Retraction Actuator and Pins for Special Detailed Inspection in Shop
(1) Send the equipment to the workshop and refer to MPD Appendix 7.

5. Close-up
Subtask 32-31-00-420-053-A

A. Installation of the Equipment
(1) Install the applicable MLG Actuating Cylinder (Ref. AMM TASK 32-31-46-400-001).

[Rev.10 from 2021] 2026.04.01 00:44:16 UTC