Restoration of the A/C after flight without one or two NLG Aft Door Assy

TASK 32-22-00-440-002-A
Restoration of the A/C after flight without one or two NLG Aft Door Assy

1. Reason for the Job
CDL 52-10
Nose Landing Gear Aft Door (715, 716)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 32-22-13-400-001-A	Installation of the NLG Aft Door-Assembly
TASK 32-22-16-400-001-A	Installation of the Rotating Rod

3. Job Set-up
Subtask 32-22-00-010-054-A

A. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position below the NLG doors.

4. Procedure
Subtask 32-22-00-420-053-A

A. Installation of the NLG Aft Doors and Attaching Parts
(1) Install the NLG rotating rods (Ref. AMM TASK 32-22-16-400-001).
(2) Install the NLG aft doors (Ref. AMM TASK 32-22-13-400-001).

5. Close-up
Subtask 32-22-00-860-060-A

A. Put the aircraft back to its initial configuration.
(1) In the cockpit, remove the temporary placard.
(2) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(3) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 00:43:00 UTC