Emergency-Lighting Inhibition With Removal of the Overhead Control and Indicating Panel

TASK 31-14-25-860-002-A
Emergency-Lighting Inhibition With Removal of the Overhead Control and Indicating Panel

ZONE: 210
FIN: 25VU

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
Panel 25VU - Location in the Cockpit and Rear Face

3. Job Set-up
Subtask 31-14-25-862-052-A

A. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002)

4. Procedure
Subtask 31-14-25-000-051-A

A. Removal of the Overhead Control and Indicating Panel

Panel 25VU - Location in the Cockpit and Rear Face

(1) Loosen the four quarter-turn fasteners.
(2) Pull the panel 25VU from its housing.
(3) Disconnect the electrical connectors.
(4) Remove the panel 25VU.
(5) Put CAP - BLANKING on the disconnected electrical connectors (1), (3), (4) and (5).
(6) On the connector (2), make a shunt between terminals A and S.

[Rev.10 from 2021] 2026.04.01 00:33:14 UTC