Remove Door 2 and 3 Escape Slide Inflation Reservoir for Hydrostatic Test

TASK 25-62-00-750-003-A
Remove Door 2 and 3 Escape Slide Inflation Reservoir for Hydrostatic Test

ZONE: 231
ZONE: 232
ZONE: 251
ZONE: 252

1. Reason for the Job
Refer to the MPD TASK: 256249-01
REMOVE DOOR 2 AND 3 ESCAPE SLIDE INFLATION RESERVOIR FOR HYDROSTATIC TEST

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
231	FWD PASSENGER COMPARTMENT
232	FWD PASSENGER COMPARTMENT
251	AFT PASSENGER COMPARTMENT
252	AFT PASSENGER COMPARTMENT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 25-62-49-000-001-A	Removal of the Escape-Slide Inflation Reservoir
TASK 25-62-49-400-001-A	Installation of the Escape-Slide Inflation Reservoir

3. Job Set-up
Subtask 25-62-00-020-055-A ** ON A/C NOT FOR ALL

A. Remove the inflation reservoir (Ref. AMM TASK 25-62-49-000-001).

4. Procedure
Subtask 25-62-00-750-052-A ** ON A/C NOT FOR ALL

A. Do the hydrostatic test of the inflation reservoir, refer to the related Component Maintenance Manual (CMM).

NOTE: To find the CMM reference, you can use the applicable P/N in the IPC. You can use the FIN in the task title to find the applicable P/N.

5. Close-up
Subtask 25-62-00-420-055-A ** ON A/C NOT FOR ALL

A. Install the inflation reservoir (Ref. AMM TASK 25-62-49-400-001).

[Rev.10 from 2021] 2026.03.31 23:40:15 UTC