Installation of the Baby Nursing Table of the Space Flex Lavatory

TASK 25-45-25-400-802-A
Installation of the Baby Nursing Table of the Space Flex Lavatory

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
Baby Nursing Table of the Space Flex Lavatory

3. Job Set-up
Subtask 25-45-25-860-051-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-45-25-210-051-A ** ON A/C NOT FOR ALL

A. Preparation for Installation
(1) Clean the component interfaces and the adjacent area.
(2) Do a visual inspection of the component interfaces and the adjacent area.
(3) Make sure that the parts retained from the removed component are clean and in the correct condition.

Subtask 25-45-25-420-052-A ** ON A/C NOT FOR ALL

B. Installation of the Baby Nursing Table of the Space Flex Lavatory

Baby Nursing Table of the Space Flex Lavatory ** ON A/C NOT FOR ALL

(1) Put the baby nursing table (2) in position and install the screws (3).
(2) Tighten the screws (3).
(3) Close the baby nursing table (2) and engage the latch (1).

Subtask 25-45-25-710-052-A ** ON A/C NOT FOR ALL

C. Operational Test of the Baby Nursing Table of the Space Flex Lavatory

Baby Nursing Table of the Space Flex Lavatory ** ON A/C NOT FOR ALL

(1) Open and close the baby nursing table (2) and make sure that it locks correctly in the closed position.

5. Close-up
Subtask 25-45-25-862-051-A ** ON A/C NOT FOR ALL

A. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:36:38 UTC