Installation of the Seat Cover Dispenser

TASK 25-45-24-400-001-A
Installation of the Seat Cover Dispenser

ZONE: 200

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
Seat Cover Dispenser

3. Job Set-up
Subtask 25-45-24-860-050-A

A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-45-24-210-050-A

A. Preparation for Installation
(1) Clean the component interfaces and the adjacent area.
(2) Make sure that the parts retained from the removed component are clean and in the correct condition.
(3) Do an inspection of the component interfaces and the adjacent area.

Subtask 25-45-24-420-050-A

B. Installation of the Seat Cover Dispenser

Seat Cover Dispenser

(1) Put the holder (2) in position on the lavatory wall and install the screws (3).
(2) Push the seat cover dispenser (1) into the holder (2).

5. Close-up
Subtask 25-45-24-862-050-A

A. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:36:33 UTC