Installation of the Hand Grip of the Space Flex Lavatory

TASK 25-45-23-400-802-A
Installation of the Hand Grip of the Space Flex Lavatory

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
Hand Grips of the Space Flex Lavatory

3. Job Set-up
Subtask 25-45-23-860-052-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-45-23-210-051-A ** ON A/C NOT FOR ALL

A. Preparation for Installation
(1) Clean the component interfaces and the adjacent area.
(2) Do a visual inspection of the component interfaces and the adjacent area.
(3) Make sure that the parts retained from the removed component are clean and in the correct condition.

Subtask 25-45-23-420-052-A ** ON A/C NOT FOR ALL

B. Installation of the Hand Grips of the Space Flex Lavatory

Hand Grips of the Space Flex Lavatory ** ON A/C NOT FOR ALL

(1) When you connect/install the components, refer to the match marks made during the removal procedure.
(2) Put the hand grips (1) in position and hold them.
(3) Tighten the set screws (2).

5. Close-up
Subtask 25-45-23-862-052-A ** ON A/C NOT FOR ALL

A. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.04.01 06:21:07 UTC