Opening/Closing of the Movable Wall Section of Lavatory D/Ds to Move a Stretcher
TASK 25-40-00-840-001-A
Opening/Closing of the Movable Wall Section of Lavatory D/Ds to Move a Stretcher
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 25-40-00-861-058-A ** ON A/C NOT FOR ALL 4. Procedure
Subtask 25-40-00-010-059-A ** ON A/C NOT FOR ALL
Subtask 25-40-00-862-059-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:34:46 UTC
Opening/Closing of the Movable Wall Section of Lavatory D/Ds to Move a Stretcher
ZONE: 200
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
| TASK 25-65-00-00 | MISCELLANEOUS EMERGENCY EQUIPMENT - DESCRIPTION AND OPERATION |
Subtask 25-40-00-861-058-A ** ON A/C NOT FOR ALL 4. Procedure
Subtask 25-40-00-010-059-A ** ON A/C NOT FOR ALL
A. Opening of the Movable Wall Section
(1) Open the lavatory doors as follows:
(a) If the single blade door (2) is installed:
1 Fully open the single blade door (2).
(b) If the bi-folding door (4) is installed:
1 Unlock the latches (8) and fully open the bi-folding door (4).
2 Lock the latches (8).
(2) Remove the headrest (7) from the Cabin Attendant Seat (CAS).
(3) If necessary, remove the Protective Breathing Equipment (PBE) (3) (Ref. AMM D/O 25-65-00-00).
(4) Disengage the latches (5) and (6) and open the movable wall section (1).
Subtask 25-40-00-410-060-A ** ON A/C NOT FOR ALL (1) Open the lavatory doors as follows:
(a) If the single blade door (2) is installed:
1 Fully open the single blade door (2).
(b) If the bi-folding door (4) is installed:
1 Unlock the latches (8) and fully open the bi-folding door (4).
2 Lock the latches (8).
(2) Remove the headrest (7) from the Cabin Attendant Seat (CAS).
(3) If necessary, remove the Protective Breathing Equipment (PBE) (3) (Ref. AMM D/O 25-65-00-00).
(4) Disengage the latches (5) and (6) and open the movable wall section (1).
B. Closing of the Movable Wall Section
(1) Close the movable wall section (1) and engage the latches (5) and (6).
(2) If the PBE (3) is removed, install it (Ref. AMM D/O 25-65-00-00).
(3) Install the headrest (7) on the CAS.
(4) Close the lavatory doors as follows:
(a) If the single blade door (2) is installed:
1 Close the single blade door (2).
(b) If the bi-folding door (4) is installed:
1 Unlock the latches (8) and close the bi-folding door (4).
2 Lock the latches (8).
(5) Make sure that the work area is clean and clear of tools and other items.
5. Close-up(1) Close the movable wall section (1) and engage the latches (5) and (6).
(2) If the PBE (3) is removed, install it (Ref. AMM D/O 25-65-00-00).
(3) Install the headrest (7) on the CAS.
(4) Close the lavatory doors as follows:
(a) If the single blade door (2) is installed:
1 Close the single blade door (2).
(b) If the bi-folding door (4) is installed:
1 Unlock the latches (8) and close the bi-folding door (4).
2 Lock the latches (8).
(5) Make sure that the work area is clean and clear of tools and other items.
Subtask 25-40-00-862-059-A ** ON A/C NOT FOR ALL
Movable Wall Section