DOC AIRBUS | AMM A320FRemoval of the Espresso Maker
TASK 25-35-15-000-002-A
Removal of the Espresso Maker
Self Explanatory
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-35-15-861-053-A ** ON A/C NOT FOR ALL Subtask 25-35-15-860-053-A ** ON A/C NOT FOR ALL
Subtask 25-35-15-020-052-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:34:23 UTC
Removal of the Espresso Maker
WARNING:
BE CAREFUL WHEN YOU REMOVE OR INSTALL THIS EQUIPMENT. THIS EQUIPMENT IS HEAVY (MORE THAN 12 KG (26.5 lb)) AND CAN CAUSE INJURY AND/OR DAMAGE.
ZONE: 200
1. Reason for the JobSelf Explanatory
NOTE: More than one person is necessary for this procedure.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | CAP - BLANKING |
| No specific | 1 | PLUG - BLANKING |
| No specific | 1 | WARNING NOTICE(S) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 38-10-00-614-002-A | Depressurization of the Potable Water System |
Espresso-MakerSubtask 25-35-15-861-053-A ** ON A/C NOT FOR ALL Subtask 25-35-15-860-053-A ** ON A/C NOT FOR ALL
B. Aircraft Maintenance Configuration
(1) Depressurize the potable water system (Ref. AMM TASK 38-10-00-614-002).
(2) Put the WARNING NOTICE(S) in position to tell persons not to pressurize the potable water system.
(3) At the related galley, on the galley control panel:
(a) Open, safety and tag the circuit breaker(s) of the espresso maker.
4. Procedure(1) Depressurize the potable water system (Ref. AMM TASK 38-10-00-614-002).
(2) Put the WARNING NOTICE(S) in position to tell persons not to pressurize the potable water system.
(3) At the related galley, on the galley control panel:
(a) Open, safety and tag the circuit breaker(s) of the espresso maker.
Subtask 25-35-15-020-052-A ** ON A/C NOT FOR ALL
A. Removal of the Espresso Maker
(2) Pull and turn the turnbuckle (5) to the unlocked position.
(3) Remove the espresso maker (1) from the galley.
(4) Temporarily install the screw (4) in the threaded hole in the drip pan (3).
(5) Put CAP - BLANKING on the disconnected electrical connectors.
(6) Put PLUG - BLANKING on the disconnected line ends.
WARNING:
MAKE SURE THAT THE POTABLE WATER SYSTEM IS DEPRESSURIZED. A PRESSURIZED SYSTEM CAN CAUSE INJURY TO PERSONS WHEN THEY DO WORK ON IT.
(1) Remove the screw (4) from the turnbuckle (5). (2) Pull and turn the turnbuckle (5) to the unlocked position.
(3) Remove the espresso maker (1) from the galley.
(4) Temporarily install the screw (4) in the threaded hole in the drip pan (3).
(5) Put CAP - BLANKING on the disconnected electrical connectors.
(6) Put PLUG - BLANKING on the disconnected line ends.