Removal of the Stowage AFT RH

TASK 25-27-44-000-007-A
Removal of the Stowage AFT RH

WARNING: BE CAREFUL WHEN YOU REMOVE OR INSTALL THIS EQUIPMENT. THIS EQUIPMENT IS HEAVY (MORE THAN 12 KG (26.5 lb)) AND CAN CAUSE INJURY AND/OR DAMAGE.

CAUTION: WHEN YOU MOVE A HEAVY COMPONENT, DO NOT PUSH IT ALONG THE CABIN FLOOR OR LET IT RUB AGAINST THE FLOOR. IF YOU DO, YOU CAN CAUSE DAMAGE TO THE CABIN FLOOR AND/OR THE COMPONENT.

FIN: 6578MM ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 25-21-41-000-001-A	Removal of the Passenger Seats
Stowage

3. Job Set-up
Subtask 25-27-44-861-060-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-27-44-010-071-E ** ON A/C NOT FOR ALL

B. Get Access
(1) Remove and identify the equipment which is kept in the stowage.
(2) If necessary, remove the seat-row forward of the stowage
(Ref. AMM TASK 25-21-41-000-001).

4. Procedure
Subtask 25-27-44-020-060-AX ** ON A/C NOT FOR ALL

A. Removal of the Stowage

Stowage ** ON A/C NOT FOR ALL

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Open the door (4).
(3) Remove the screws (7), the washers (6) and the upper attachment (5).
(4) Remove the screws (2) and the cover (3).
(5) Remove the screws (8) and the covers (9).
(6) Remove the bolts (10), the washers (11) and the adjustment washers (12).
(7) Remove the screws (13) and the fitting plates (14).

WARNING: SUPPORT THE UNIT/ASSEMBLY. THE UNIT/ASSEMBLY IS HEAVY. IF YOU DO NOT SUPPORT IT, IT WILL FALL. THIS CAN CAUSE INJURY TO PERSONS, AND/OR DAMAGE TO EQUIPMENT.

CAUTION: WHEN YOU MOVE A HEAVY COMPONENT, DO NOT PUSH IT ALONG THE CABIN FLOOR OR LET IT RUB AGAINST THE FLOOR. IF YOU DO, YOU CAN CAUSE DAMAGE TO THE CABIN FLOOR AND/OR THE COMPONENT.

(8) Carefully lift the stowage (1) and remove it.
(9) Remove the floor fittings (15), the bushings (16) and the floor fittings (17).
(10) Remove the seat-track fittings (18) from the seat tracks.

[Rev.10 from 2021] 2026.04.01 06:19:20 UTC