Removal of the Lateral Movable Class Divider (MCD)

TASK 25-26-43-000-003-A
Removal of the Lateral Movable Class Divider (MCD)

ZONE: 200

1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 25-26-41-000-013-A	Removal of the Curtains
Left and Right Class Divider ** ON A/C NOT FOR ALL
Left and Right Class Divider ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 25-26-43-861-054-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-26-43-010-065-A ** ON A/C NOT FOR ALL

B. Get Access
(1) Remove the curtain from the lateral class divider (Ref. AMM TASK 25-26-41-000-013).

4. Procedure
Subtask 25-26-43-020-052-B ** ON A/C NOT FOR ALL

A. Removal of the Lateral Class Divider

Left and Right Class Divider ** ON A/C NOT FOR ALL

(1) Hold the class divider (1) and pull the handle (2) to the unlocked position.
(2) Carefully pull the class divider (1) out of the frame (3) and remove it.
(3) Loosen the screws (6).
(4) Hold the frame (3), disengage the brackets (5) form the passenger service channel and remove the frame (3).
(5) If necessary, remove the screws (6), the blocks (4) and the brackets (5).

Subtask 25-26-43-020-052-C ** ON A/C NOT FOR ALL

A. Removal of the Lateral Class Divider

Left and Right Class Divider ** ON A/C NOT FOR ALL

NOTE: The procedure to remove the left and right class divider is the same.

(1) Push the button (6) until the indicators (9) appear red.
(2) Carefully pull the class divider (1) out of the attachment panel (2) at the passenger service channel (3) and remove it.
(3) Install the cover (5).

[Rev.10 from 2021] 2026.03.31 23:32:41 UTC