Removal of the Curtains

TASK 25-26-41-000-013-A
Removal of the Curtains

FIN: 6401MM1 ** ON A/C NOT FOR ALL
FIN: 6402MM1 ** ON A/C NOT FOR ALL
FIN: 6402MM2 ** ON A/C NOT FOR ALL
FIN: 6405MM1 ** ON A/C NOT FOR ALL
FIN: 6405MM2 ** ON A/C NOT FOR ALL
FIN: 6406MM3 ** ON A/C NOT FOR ALL
FIN: 6407MM1 ** ON A/C NOT FOR ALL
FIN: 6407MM3 ** ON A/C NOT FOR ALL
FIN: 6408MM1 ** ON A/C NOT FOR ALL
FIN: 6408MM3 ** ON A/C NOT FOR ALL
FIN: 6409MM1 ** ON A/C NOT FOR ALL
FIN: 6409MM2 ** ON A/C NOT FOR ALL
FIN: 6409MM3 ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Curtains

3. Job Set-up
Subtask 25-26-41-861-055-A

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-26-41-010-073-A

B. Get Access
(1) Get access to the cabin.

4. Procedure
Subtask 25-26-41-020-076-A

A. Removal of the Curtains from the Curtain Rails

Curtains

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) If installed, remove the screws (3), the cover plates (4) and the cover clips (6).
(3) Release the end stops (5).
(4) Move the curtain (2) with the gliders (7) and the end stops (5) out of the curtain rails (1).

[Rev.10 from 2021] 2026.03.31 23:32:29 UTC