DOC AIRBUS | AMM A320FRemoval of the Aft Curtain Rail
TASK 25-26-41-000-003-A
Removal of the Aft Curtain Rail
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 25-26-41-861-050-A Subtask 25-26-41-010-075-A
Subtask 25-26-41-020-054-J ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 06:07:44 UTC
Removal of the Aft Curtain Rail
ZONE: 260
1. Reason for the JobNOTE: More than one person is necessary for this procedure.
2. Job Set-up InformationA. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 260 | AFT CABIN UTILITY AREA |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-26-41-000-013-A | Removal of the Curtains |
Aft Curtain RailSubtask 25-26-41-861-050-A Subtask 25-26-41-010-075-A
B. Get Access
(1) If the aft curtain(s) is (are) installed, remove it (them) (Ref. AMM TASK 25-26-41-000-013).
4. Procedure(1) If the aft curtain(s) is (are) installed, remove it (them) (Ref. AMM TASK 25-26-41-000-013).
Subtask 25-26-41-020-054-J ** ON A/C NOT FOR ALL
A. Removal of the Aft Curtain Rail
(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screw (5) and the end cap (4).
(3) Hold the curtain rail (1) and remove the screws (2) and the curtain rail (1).
(4) Remove the fittings (7).
(5) If necessary, remove the screws (6) and the brackets (3).
Subtask 25-26-41-020-054-P ** ON A/C NOT FOR ALL (1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screw (5) and the end cap (4).
(3) Hold the curtain rail (1) and remove the screws (2) and the curtain rail (1).
(4) Remove the fittings (7).
(5) If necessary, remove the screws (6) and the brackets (3).
A. Removal of the Curtain Rails
(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screws (8) and the end caps (7).
(3) Hold the curtain rail (1), remove the screws (6) and the curtain rail (1).
(4) Hold the curtain rail (2), remove the screws (6), lift the spring (5) and remove the curtain rail (2) and the spring (5).
(5) Remove the fittings (9).
(6) If necessary, remove the screws (3) and the brackets (4).
Subtask 25-26-41-020-054-AS ** ON A/C NOT FOR ALL (1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screws (8) and the end caps (7).
(3) Hold the curtain rail (1), remove the screws (6) and the curtain rail (1).
(4) Hold the curtain rail (2), remove the screws (6), lift the spring (5) and remove the curtain rail (2) and the spring (5).
(5) Remove the fittings (9).
(6) If necessary, remove the screws (3) and the brackets (4).
A. Removal of the Aft Curtain Rail
(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screw(s) (5) and the end cap(s) (4).
(3) Hold the curtain rail (1) and remove the screws (2).
(4) Remove the curtain rail (1).
(5) Remove the fittings (7) from the curtain rail (1).
(6) If necessary, remove the screws (6) and the brackets (3).
(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the screw(s) (5) and the end cap(s) (4).
(3) Hold the curtain rail (1) and remove the screws (2).
(4) Remove the curtain rail (1).
(5) Remove the fittings (7) from the curtain rail (1).
(6) If necessary, remove the screws (6) and the brackets (3).