Removal of the Forward Curtain Rail

TASK 25-26-41-000-001-A
Removal of the Forward Curtain Rail

ZONE: 220
ZONE: 230

1. Reason for the Job

NOTE: More than one person is necessary for this procedure.

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
220	FWD CAB UTILITY AREAS
230	FWD PASSENGER COMPARTMENT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 23-73-22-000-001-A	Removal of the Attendant Indication Panel
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 25-26-41-000-013-A	Removal of the Curtains
Forward Curtain Rails ** ON A/C NOT FOR ALL
Forward Curtain Rails ** ON A/C NOT FOR ALL
Forward Curtain Rail ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 25-26-41-861-051-A

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-26-41-010-074-A

B. Get Access
(1) Remove the forward curtains (Ref. AMM TASK 25-26-41-000-013).

4. Procedure
Subtask 25-26-41-020-050-AW ** ON A/C NOT FOR ALL

A. Removal of the Forward Curtain Rails

Forward Curtain Rails ** ON A/C NOT FOR ALL

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove attendant indication panel 320RH1 (Ref. AMM TASK 23-73-22-000-001).
(3) Open the door (7) of the overhead stowage compartment.
(4) Remove the screw (6) and the washer (5).
(5) Pull the end panel (3) inboard to release it from the holders (4) and remove the end panel (3).
(6) Remove the screws (11) and the end caps (10).
(7) Hold the curtain rail (2) and remove the retaining ring (15), washer (14), screws (8) and curtain rail (2).
(8) Hold the curtain rail (1) and remove the screws (8) and the curtain rail (1).
(9) Remove the fittings (13).
(10) If necessary, remove the screws (12) and the brackets (9).

Subtask 25-26-41-020-050-CH ** ON A/C NOT FOR ALL

A. Removal of the Forward Curtain Rails

Forward Curtain Rails ** ON A/C NOT FOR ALL

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove attendant indication panel 320RH1 (Ref. AMM TASK 23-73-22-000-001).
(3) Open the doors (7) and remove the screws (5) and the washers (6).
(4) Pull the end panels (3) inboard to release them from the holders (4) and remove them.
(5) Remove the screw (11) and the end cap (10).
(6) Hold the curtain rail (1) and remove the screws (8) and the curtain rail (1).
(7) Hold the curtain rail (2) and remove the retaining ring (15), washer (14), screws (8) and curtain rail (2).
(8) Remove the fittings (13).
(9) If necessary, remove the screws (12), the washers (16) and the brackets (9).

Subtask 25-26-41-020-050-CR ** ON A/C NOT FOR ALL

A. Removal of the Forward Curtain Rail

Forward Curtain Rail ** ON A/C NOT FOR ALL

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove attendant indication panel 320RH1 (Ref. AMM TASK 23-73-22-000-001).
(3) Open the doors (6) of the overhead stowage compartments.
(4) Remove the screws (5) and the washers (4).
(5) Pull the end panels (2) inboard to release them from the holders (3) and remove the end panels (2).
(6) Remove the retaining ring (10) and the washer (9).
(7) Remove the screws (11), the curtain rail (1) and the fittings (13).
(8) If necessary, remove the screws (8), the washers (12) and the brackets (7).

[Rev.10 from 2021] 2026.04.01 06:10:37 UTC