Installation of the Latch Assembly of the Overhead Stowage-Compartment Door

TASK 25-24-41-400-003-A
Installation of the Latch Assembly of the Overhead Stowage-Compartment Door

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	Torque wrench: range to between 0.28 and 0.22 m.daN (24.78 and 19.47 lbf.in )

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
Latch Assembly - Overhead Stowage-Compartment Door ** ON A/C NOT FOR ALL
Latch Assembly - Overhead Stowage-Compartment Door ** ON A/C NOT FOR ALL
Latch Assembly - Spacer ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 25-24-41-860-053-A

A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-24-41-420-064-A ** ON A/C NOT FOR ALL

A. Installation of the Latch Assembly of the Overhead Stowage-Compartment Door.

Latch Assembly - Overhead Stowage-Compartment Door ** ON A/C NOT FOR ALL

(1) Open the overhead bin door (1).
(2) Put the latch assembly (4) in position.
(3) Install the washers (3) and the screws (2).
(4) Close the overhead bin door (1).

Subtask 25-24-41-420-064-B ** ON A/C NOT FOR ALL

A. Installation of the Latch Assembly of the Overhead Stowage-Compartment Door.

Latch Assembly - Overhead Stowage-Compartment Door ** ON A/C NOT FOR ALL

(1) Make sure that the overhead stowage-compartment door (1) is open.
(2) Put the latch assembly (2) in position.
(3) Install the washers (3) and the screws (4).
(4) TORQUE the screws (4) to between 0.28 and 0.22 m.daN (24.78 and 19.47 lbf.in )

.
(5) Close the overhead stowage-compartment door (1).

Subtask 25-24-41-420-065-A ** ON A/C NOT FOR ALL

B. Installation of the Latch Assembly of the Spacer.

Latch Assembly - Spacer ** ON A/C NOT FOR ALL

(1) Open the door (1).
(2) Put the bracket in position and install the screws (6) and (7).
(3) Put the latch assembly (5) and the cover (4) in position.
(4) Install the washers (3) and screws (2).
(5) Close the door (1).

5. Close-up
Subtask 25-24-41-862-053-A

A. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:32:10 UTC