Installation of the Blinds on the Passenger/Crew Doors

TASK 25-23-46-400-003-A
Installation of the Blinds on the Passenger/Crew Doors

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
Blinds on the Passenger/Crew Doors

3. Job Set-up
Subtask 25-23-46-860-053-A

A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-23-46-210-056-A

A. Preparation for Installation
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.

Subtask 25-23-46-420-052-A

B. Installation of the Blinds on the Passenger/crew Doors

Blinds on the Passenger/Crew Doors

(1) Put the blind (11) with the slide guide (10) in position.
(2) Install the washers (5) and the screws (6).
(3) If removed, install the washers (7), the springs (9) and the screws (8).
(4) Put the lining assembly (1) in position and install the washers (3) and the screws (4).
(5) Install the lining (2).
(6) Clean the component interfaces and the adjacent area.

5. Close-up
Subtask 25-23-46-410-054-A

A. Close Access
(1) Close the passenger/Crew Door (Ref. AMM TASK 52-10-00-410-001).

Subtask 25-23-46-862-052-A

B. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:31:34 UTC