Safetying of the In-armrest Mounted Passenger-Meal-Table

TASK 25-21-00-040-804-A
Safetying of the In-armrest Mounted Passenger-Meal-Table

ZONE: 200

1. Reason for the Job
MMEL 25-20-07A
PASSENGER SEAT MEAL TABLE
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power

3. Job Set-up
Subtask 25-21-00-860-071-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-21-00-040-054-A

A. Deactivation of the In-armrest Mounted Passenger-Meal-Table
(1) Safety the in-armrest mounted passenger-meal-table of the related seat in the Taxi, Takeoff and Landing (TTOL) position.
(2) Put the WARNING NOTICE(S) in position to tell persons not to use the in-armrest mounted passenger-meal-table of the seat.

Subtask 25-21-00-560-053-A

B. Aircraft Maintenance Configuration
(1) Make an entry in the logbook.
(2) Remove all the fixtures, tools, test and support equipment used during this procedure.
(3) Make sure that the work area is clean and clear of tools and other items.

5. Close-up
Subtask 25-21-00-860-072-A

A. Aircraft Maintenance Configuration
(1) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:30:09 UTC