Safetying of the backrest mounted Passenger Meal Table
TASK 25-21-00-040-803-A
Safetying of the backrest mounted Passenger Meal Table
MMEL 25-20-07A
PASSENGER SEAT MEAL TABLE
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-21-00-860-066-A
Subtask 25-21-00-040-052-A
Subtask 25-21-00-860-067-A
[Rev.10 from 2021]
2026.03.31 23:30:14 UTC
Safetying of the backrest mounted Passenger Meal Table
ZONE: 200
1. Reason for the JobMMEL 25-20-07A
PASSENGER SEAT MEAL TABLE
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | WARNING NOTICE(S) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
Subtask 25-21-00-860-066-A
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
4. Procedure(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
Subtask 25-21-00-040-052-A
A. Deactivation of a backrest mounted Passenger Meal Table
(1) Safety the backrest mounted meal table of the related seat in the TTOL position.
(2) Put a WARNING NOTICE(S) in position to tell persons not to use the meal table of the seat.
Subtask 25-21-00-560-052-A (1) Safety the backrest mounted meal table of the related seat in the TTOL position.
(2) Put a WARNING NOTICE(S) in position to tell persons not to use the meal table of the seat.
B. Aircraft Maintenance Configuration
(1) Make an entry in the logbook.
(2) Remove all the fixtures, tools, test and support equipment used during this procedure.
(3) Make sure that the work area is clean and clear of tools and other items.
5. Close-up(1) Make an entry in the logbook.
(2) Remove all the fixtures, tools, test and support equipment used during this procedure.
(3) Make sure that the work area is clean and clear of tools and other items.
Subtask 25-21-00-860-067-A
A. Aircraft Maintenance Configuration
(1) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).
(1) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).