Deactivation of the Passenger-Seat Recline Function (Locking of the Passenger Seat Backrest in the Taxi, Takeoff and Landing (TTOL) position)
TASK 25-21-00-040-801-A
Deactivation of the Passenger-Seat Recline Function (Locking of the Passenger Seat Backrest in the Taxi, Takeoff and Landing (TTOL) position)
MMEL 25-20-02A
PASSENGER SEAT BACKREST
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 25-21-00-860-058-A
Subtask 25-21-00-040-050-A
Subtask 25-21-00-860-059-A
[Rev.10 from 2021]
2026.03.31 23:30:09 UTC
Deactivation of the Passenger-Seat Recline Function (Locking of the Passenger Seat Backrest in the Taxi, Takeoff and Landing (TTOL) position)
ZONE: 230
ZONE: 240
ZONE: 250
ZONE: 260
Task Summary
1. Reason for the JobZONE: 240
ZONE: 250
ZONE: 260
Task Summary
| Access | Test | Specific Tools | Mhr | E/T | Nb Men |
|---|---|---|---|---|---|
| NO | YES | NO | 0.3 | 0.3 | 1 |
MMEL 25-20-02A
PASSENGER SEAT BACKREST
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 230 | FWD PASSENGER COMPARTMENT |
| 240 | MID PASSENGER COMPARTMENT |
| 250 | AFT PASSENGER COMPARTMENT |
| 260 | AFT CABIN UTILITY AREA |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
Subtask 25-21-00-860-058-A
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
4. Procedure(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
Subtask 25-21-00-040-050-A
A. Deactivation of a Passenger-Seat Recline Function
(1) Safety the backrest of the related seat in the TTOL position.
Subtask 25-21-00-560-050-A (1) Safety the backrest of the related seat in the TTOL position.
B. Aircraft Maintenance Configuration
(1) Make an entry in the logbook.
(2) Remove all the fixtures, tools, test and support equipment used during this procedure.
(3) Make sure that the work area is clean and clear of tools and other items.
5. Close-up(1) Make an entry in the logbook.
(2) Remove all the fixtures, tools, test and support equipment used during this procedure.
(3) Make sure that the work area is clean and clear of tools and other items.
Subtask 25-21-00-860-059-A
A. Aircraft Maintenance Configuration
(1) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).
(1) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).