Repair of Loose Baby-Bassinet Inserts

TASK 25-20-00-350-802-A
Repair of Loose Baby-Bassinet Inserts

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05BAE1)	Threadlocking Adhesive-- Medium strength -
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
Baby-Bassinet Inserts

3. Job Set-up
Subtask 25-20-00-860-062-A

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-20-00-350-057-A

A. Repair of Loose Baby-Bassinet Inserts

Baby-Bassinet Inserts

NOTE: This procedure is only applicable for segmented-and-screwed baby bassinet inserts (referred to as inserts).

(1) Remove the insert (1).
(2) Do a visual inspection of the component interface and/or the adjacent area.
(3) Make sure that the parts retained from the removed component are clean and in the correct condition.
(4) If necessary clean the insert (1) with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .
(5) If necessary hold the shouldered bush insert (2) in position.
(6) Carefully apply Threadlocking Adhesive-- Medium strength - (Material No.05BAE1) to the threads of the insert (1) and install it.
(7) Make sure that there is no adhesive in the hole of the insert (1).
(8) Let the adhesive cure.
(9) Attach a baby bassinet to the repaired insert and make sure that the baby bassinet engages correctly.

5. Close-up
Subtask 25-20-00-860-063-A

A. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:30:05 UTC