Removal of the USB Converter of the Personal Tablet

TASK 25-18-12-000-801-A
Removal of the USB Converter of the Personal Tablet

ZONE: 211
ZONE: 212

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 25-13-41-000-803-A	Removal of the Personal Tablet Support
TASK 56-12-11-000-002-A	Removal of the Sliding Window Panel
TASK 56-12-11-000-002-A-01	Removal of the Sliding Window Panel
USB Converter of the Personal Tablet

3. Job Set-up
Subtask 25-18-12-865-054-A ** ON A/C NOT FOR ALL

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
122VU	ANTI ICE/WHC/2	5DG2	W13
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/WHC/1	5DG1	X13
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05
123VU	ANTI ICE/L/WHSLD	1DG1	AF10
123VU	ANTI ICE/R/WHSLD	1DG2	AF03

Subtask 25-18-12-010-050-A

B. Get Access
(1) Remove the personal tablet support (Ref. AMM TASK 25-13-41-000-803).
(2) Remove the sliding window lining (Ref. AMM TASK 56-12-11-000-002).

4. Procedure
Subtask 25-18-12-020-050-A

A. Removal of the USB Converter of the Personal Tablet

USB Converter of the Personal Tablet

(1) Hold the inner support plate (5) and the USB converter (4) that are installed on the sliding window lining.
(2) Remove the screws (1) and (2).
(3) Remove the inner support plate (5) and the USB converter (4) from the sliding window lining.
(4) Remove the outer support plate (3) from the sliding window lining.

[Rev.10 from 2021] 2026.03.31 23:29:36 UTC